We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Nachi Bearing NU326MYC3 Cylindrical Roller Bearing Single Row with Brass Cage 130mm Inner Diameter x 280mm Outer Diameter x 58mm Width Cylindrical Roller Bearing - Single Row with Brass Cage
MODEL NU326MYC3
Contact supplier for technical support on: 800-829-5787
$1,089.76 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel Alloy
Bore Type
Cylindrical
Cage Material
Machined High Strength Brass Cage
Closure Type
Open
Contact Angle (Deg)
N/A
Dynamic Load Capacity (N)
555000
Grease Fill
N/A
Inner Diameter (mm)
130
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
C3
ISO Precision Class
P0
Limiting Speed - Grease (RPM)
2200
Limiting Speed - Oil (RPM)
2600
Max Operating Temp.
120°C (248°F)
Number of Rows
1
Outer Diameter (mm)
280
Outer Ring Material
JIS SUJ2 Steel
Preload
N/A
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Series
NU Series
Snap Ring
No
Static Load Capacity (N)
665000
Universally (Flush) Ground
N/A
Width (mm)
2600
Cylindrical roller bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in the assembly/disassembly of components The NU Type bearings has shoulders on both sides of the outer ring and no shoulder on the inner ring. This allows the shaft to move axially for thermal expansion. Some sizes may be available in a high capacity design (EG) that has larger diameter rollers and a polyamine cage. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in pumps, compressors, gearboxes, transmissions, rolling mills, crushers and pulverizers. This bearing is often used in high speed applications. Separable components simplify mounting and removal. Long life. Heavy radial load capacity. Not suitable for thrust loads. Accommodates axial expansion and contraction. Effective when the bearing rings require interference. Low friction between rollers and flanges. No redial load capacity due to no flange of outer or inner ring. Used a non-locating side. Inner ring without rib. Outer ring with ribs on both sides([JIS B 1533).
| Brand | RAB Lighting |
| Model | CDLED6WU-26W-50D930-K |
