We never sell your data to third parties
SKF TKSU 10 ultrasonic leak detector for locating leaks in compressed air and gas systems. Detects high-frequency sound waves generated by escaping gas, converting them to audible signals. Includes directional probe, headphones, and carrying case. Suitable for industrial maintenance and energy conservation applications.
MODEL TKSU 10
$2,662.02 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Auto Switch Off
Continues, 10 min, off
Battery
2x AA (LR6) Alkaline (incl.)
Battery Life
7 h
Case Dimensions (l X H X W)
530 × 110 × 360 mm
Colour
Blue, Black
Degree of Protection (IP)
IP 42
Display
160x128 pixels Colour OLED
Headset Connector
Stereo jack connector of 6, 35 mm
Headset Impedance
230 Ω
Headset Weight
255 g
Housing
ABS plastic
Instrument Dimensions
158 × 59 × 39 mm
Instrument Weight
350 g
Measurement Frequency
35 to 42 kHz
Measurement Method
Piezoelectric crystal
Measurement Range
-6 to 99, 9 dBµV, reference 0 dB = 1 µV
Operating Temperature Range
-10-50 °C
Pack Height
115 mm
Pack Length
530 mm
Pack Width
365 mm
Power Adapter
Not included but provided with mini-USB connection for continuous use
Recommended Storage Temperature
-30-60 °C
Relative Humidity
10 to 90%, non-condensing
Signal Amplification
+30 to +102 in steps of 6 dB
Sound Pressure Level (max)
+83 dB with supplied headset
Volume Adjustment Steps
5
Ultrasonic Leak DetectorTKSU 10 Ultrasonic Leak Detectorx Easy to use; no training required Leak detection from a distance in noisy industrial environments Color OLED display assists in adjusting sensitivity settings and shows measurement values Reduces energy and maintenance costs via leak identification and repair Lightweight, handheld device with industrial headset included Independently adjustable sensor sensitivity and headset volume
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF