We never sell your data to third parties
SKF 6320-2RS1 is a 100mm bore deep groove ball bearing, double sealed with NBR rubber contact seals on both sides. It features a pressed steel cage and normal internal clearance. Suitable for electric motors, pumps, fans, and general industrial applications.
MODEL 6320-2RS1
$826.46 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Basic Dynamic Load Rating
174 kN
Basic Static Load Rating
140 kN
Bearing Material
Bearing steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
100 mm
Bore Type
Cylindrical
Cage
Steel
Clearance
Normal
Coating
Without
Filling Slots
Without
I.D.
3.937 in
Limiting Speed
2000 r/min
Lubricant
Grease
Matched Arrangement
No
Number of Rows
1
O.D. (in)
8.465
Pack Height
235 mm
Pack Length
230 mm
Pack Width
58 mm
Radial Internal Clearance
CN
Relubrication Feature
Without
Sealing
Seal on both sides
Sealing Type
Contact
Tolerance Class
Normal
Width
47 mm
Deep groove ball bearing with seals or shields
Single row deep groove ball bearings with seals or shields are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than many other bearing types. The integral sealing can significantly prolong bearing service life because it keeps lubricant in the bearings and contaminants out.
- Integral sealing prolongs bearing service life
- Simple, versatile and robust design
- Low friction and high-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#209002
Brand
Nachi Bearing
Model
6320-2NSLC3
#1495023
Brand
Koyo Bearing
Model
6320 2RS
#2302844
Brand
Rollway
Model
6320 2RS C3
#5034416
Brand
NSK Bearings
Model
6320DDUC3
#2302843
Brand
Rollway
Model
6320 2RS
#278519
Brand
NTN Bearing
Model
6320LLUC3/EM
#5034415
Brand
NSK Bearings
Model
6320DDU
| Brand | Dichtomatik |
| Model | 67110509 |
| Brand | Pyramex |
| Model | RVHL2710BRX3 |
| Brand | Harwal |
| Model | 82 x 105 x 12ADLPV |
| Brand | SKF Bearing |
| Model | NU 2216 ECP |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF