We never sell your data to third parties
SKF TKDT 10 digital thermometer for bearing and machinery maintenance. Provides accurate non-contact temperature measurement with laser sighting for precise targeting. Backlit display enables easy reading in low-light conditions. Ideal for monitoring bearing housing, motor, and equipment temperatures.
MODEL TKDT 10
$462.76 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Auto Switch Off
20 min, off
Battery
3x AAA (LR03) Alkaline (incl.)
Battery Life
18 hours typical use (backlight on) h
Case Dimensions (l X H X W)
530 x 85 x 180 mm
Colour
Blue;Dark Grey
Connection
2x Type-K connectors
Degree of Protection (IP)
IP 40
Display
LCD with dual temperature display with switchable backlight
Housing
Plastic; thermoplastic rubber
Instrument Dimensions
160 x 63 x 30 mm
Instrument Weight
200 g
Measurement Modes
°C, °F, K
Operating Temperature Range
0-50 °C
Pack Height
85 mm
Pack Length
533 mm
Pack Width
185 mm
Probe
Supplied with K type probe, TMDT 2-30 included (max. 900 °C);Other probes optional
Probe Response Time
2.3 s
Recommended Storage Temperature
-10-60 °C
Relative Humidity
10 to 90% RH non-condensing
Resolution
0.1 °C/°F (below 999.9);1 °C/°F (above 1000)
Temperature Range Using Probe
-200-1372 °C
SKF Thermometer TKDT 10
The SKF Thermometer TKDT 10 is suitable for a wide range of applications. It is a pocket sized, user friendly instrument with a wide temperature measurementrange and it has the option to connect up to two temperature probes for simultaneous measurements. The TKDT 10 is supplied with a temperature probe included.
- Easily readable with large, backlit LCD screen
- Simultaneous measurements of two temperatures possible with additional temperature probe
- Hold function freezes displayed temperature for better readability
- User selectable auto power off function
- Temperature probe included
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Nachi Bearing |
| Model | 51113 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF