We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF W 6207-2RS1/VP311 is a 35mm bore deep groove ball bearing with double contact seals (NBR) and VP311 food-grade grease. It features a pressed steel cage and normal clearance. Suitable for food processing and packaging equipment.
MODEL W 6207-2RS1/VP311
$221.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Basic Dynamic Load Rating
22.1 kN
Basic Static Load Rating
15.3 kN
Bearing Material
Stainless steel
Bearing Outer Ring Locating Feature
None
Bore Diameter
35 mm
Bore Type
Cylindrical
Cage
Steel
Clearance
Normal
Coating
Without
Filling Slots
Without
I.D.
1.378 in
Limiting Speed
6000 r/min
Lubricant
Food grade grease
Matched Arrangement
No
Number of Rows
1
O.D. (in)
2.835
Pack Height
78 mm
Pack Length
76 mm
Pack Width
23 mm
Radial Internal Clearance
CN
Relubrication Feature
Without
Sealing
Seal on both sides
Sealing Type
Contact
Tolerance Class
Normal
Width
17 mm
SKF Food line stainless steel deep groove ball bearing with integral sealing
SKF Food line deep groove ball bearings are compliant with food safety regulations. Designed with food grade seals and grease, they enhance food safety, increase reliability and support sustainable development in corrosive environments (VP311). As with deep groove ball bearings generally, they are particularly versatile, have low friction and are optimized for low noise and low vibration, which enables high rotational speeds.
- Compliant with food safety regulations
- Greater chemical and corrosion resistance
- Simple, versatile and robust design
- Low friction and high-speed capability
- Accommodate radial and axial loads in both directions
- Require little maintenance
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | SMC |
| Model | C2Q20RBAJ076-015 |
| Brand | MRO Supply |
| Model | C2404-08-06-SS |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-772993 |
| Brand | Allen Bradley |
| Model | 855W-C24Y7Y5L4P1 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-771283 |
| Brand | CoxReels |
| Model | 1125-5-100-EF |
| Brand | E-T-A |
| Model | 2210-T210-K0M1-H131-2A |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF