We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Nachi Bearing N222MYC3 Cylindrical Roller Bearing Single Row with Brass Cage 110mm Inner Diameter x 200mm Outer Diameter x 38mm Width Cylindrical Roller Bearing - Single Row with Brass Cage
MODEL N222MYC3
Contact supplier for technical support on: 800-829-5787
$707.24 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel Alloy
Bore Type
Cylindrical
Cage Material
Machined High Strength Brass Cage
Closure Type
Open
Contact Angle (Deg)
N/A
Dynamic Load Capacity (N)
240000
Grease Fill
N/A
Inner Diameter (mm)
110
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
C3
ISO Precision Class
P0
Limiting Speed - Grease (RPM)
3200
Limiting Speed - Oil (RPM)
3800
Max Operating Temp.
120°C (248°F)
Number of Rows
1
Outer Diameter (mm)
200
Outer Ring Material
JIS SUJ2 Steel
Preload
N/A
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Series
N Series
Snap Ring
No
Static Load Capacity (N)
290000
Universally (Flush) Ground
N/A
Width (mm)
3800
Cylindrical roller bearings utilize a modified cylindrical roller that provides line contact with the inner and outer ring raceways. They are suitable for high speeds and have a high radial load capacity. The rollers are guided by ribs on either the inner or outer rings. Depending upon the configuration, the bearings may or may not be able to accept any axial loading. The inner and outer rings are separable which may aid in the assembly/disassembly of components. The N Type bearings only have shoulders on both sides of the inner ring. This allows the shaft to move axially within the outer ring. This is important for thermal expansion. Stamped steel or machined brass (MY) cages are generally used. These bearings are most commonly used in gearboxes, rolling mills, crushers and pulverizers. Separable components simplify mounting and removal. Long life. Heavy radial load capacity. Not suitable for thrust loads. Accommodates axial expansion and contraction. Effective when the bearing rings require interference. Low friction between rollers and flanges. No redial load capacity due to no flange of outer or inner ring. Used a non-locating side. Inner ring with ribs on both sides. Outer ring without rib.
| Brand | FYH Bearing |
| Model | SAPFL20516FP7 |
| Brand | INA Bearing |
| Model | GAKL5PW |
| Brand | SMC |
| Model | PFMB7501-N04-E |
| Brand | Coilhose |
| Model | 8862AAGM |
| Brand | Coilhose |
| Model | 27C6-S |
| Brand | FYH Bearing |
| Model | NAT204 20MM |
| Brand | Dichtomatik |
| Model | 67027136 |