We never sell your data to third parties
SKF TWIM 15/230V induction heater, 15 kVA, 230V single-phase power. Designed for mounting bearings and ring-shaped components with automatic demagnetization and temperature control. Suitable for workshop and maintenance applications.
MODEL TWIM 15/230V
$3,712.35 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Colour
Blue;Dark Grey
Cooling Fan
Yes
Current Consumption (max)
10 A
Dimensions (W X L X H)
450 x 500 x 100 mm
Error Guiding Codes
Yes
Heating performance example (bearing, weight, temperature, time)
6320, 7.1kg, 110°C, 5min 20sec
Heating Temperature (max)
200 °C
Heating Temperature Control
40-200 °C
Heating Temperature Steps
1 °C
Heating Time Control
0.1-60 min
Heating Time Steps
0.1 min
Housing
Glassfiber filled special PA
Pack Height
130 mm
Pack Length
465 mm
Pack Width
456 mm
Power Consumption (max)
2.3 kVA
Power Setting
10%;25%;50%;100%
Product Weight
6.8 kg
Temperature Measurement
Magnetic probe K-type
Thermal Overload Protection
Yes
Thermometer Mode
Yes
Time Mode
Yes
Voltage
220-240 V
Voltage Frequency
50-60 Hz
Workpiece Bore Diameter
30-320 mm
Workpiece Weight (max)
20 kg
Workpiece Width (max)
85 mm
SKF Induction Heater TWIM 15 (230 V version)
The SKF TWIM 15/230V is a portable and robust induction heater that is designed for safe bearing heating for hot mounting. This compact heater is especially suitable for usage in the field, yet it is compact and versatile for usage on workbenches. The heater utilizes a smart construction and operating software to optimise the bearing heating safety and speed for bearings weighing up to 20 kg. The heater has different power modes to support heating of sensitive bearings (e.g. with reduced clearance) and non-bearing components.
- Portable, lightweight, compact and robust
- Smart and innovative bearing heating technology
- No support yokes required
- Autmatic temperature control
- Detection of bearing size and automatic heating adjustment
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | NTN Bearing |
| Model | 24160EMW33 |
| Brand | Edwards |
| Model | TD90/1.625X6 |
| Brand | NTN Bearing |
| Model | 25880/25821 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF