We never sell your data to third parties
6214ZNR, 6214-Z-NR, 6214-ZNR, and 214SFG Bearings 6200 Single Shielded Bearing With Snap Ring
6214ZNR, 6214-Z-NR, 6214-ZNR, and 214SFG
MODEL 6214ZNR
NTN Bearing
$210.79
Call to confirm
SKF Bearing
$236.77
Timken
$257.90
MRC Bearing
$0.00
NSK Bearings
$225.30
Call to confirm
$210.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
a (in)
0.1598
B (in)
0.9449
Ball Material
Steel
Ball material
Steel
Bore Type
Round
Bore type
Round
Cage Material
Steel
Cage material
Steel
Cage Type
Pressed
Cage type
Pressed
Configuration
One
D (in)
4.9213
d (in)
2.7559
D1
4.7331 in
D2
5.3031 in
Da max
4.6063 in
da max
3.3465 in
da min
3.0709 in
Dynamic Load Rating
15510 lbf
Dynamic load rating
15510 lbf
Enclosure
Single Shielded
f (in)
0.1110
Factor
14.5
I.D.
70 mm
Limiting Speed - Grease
5100 RPM
Limiting speed - grease
5100 RPM
Limiting Speed - Oil
6000 RPM
Limiting speed - oil
6000 RPM
Material
High carbon chrome steel
O.D.
125 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Precision
ISO class 0
r (in)
0.0591
r1
0.0197 in
Radial Internal Clearance
CN
Radial internal clearance
CN
ras max
0.0591 in
Static Load Rating
9900 lbf
Static load rating
9900 lbf
Type
Deep Groove Ball Bearing
Width
24 mm
Technical Specifications
Type | Deep Groove Ball Bearing |
|---|---|
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 6000 RPM |
Limiting Speed - Grease | 5100 RPM |
Precision | ISO Class 0 |
Configuration | One |
Factor | 14.5 |
Radial Internal Clearance | CN |
Static Load Rating | 9900 lbf44000 N44.00 kN |
Dynamic Load Rating | 13900 lbf62000 N62.00 kN |
Enclosure | Single Shielded |
| 2.403 lb1.090 kg | |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 2.7559 in70.000 mm |
|---|---|
D | 4.9213 in125.000 mm |
B | 0.9449 in24.000 mm |
D1 | 4.7331 in120.220 mm |
D2 | 5.3031 in134.700 mm |
a | 0.1598 in4.060 mm |
f | 0.1110 in2.820 mm |
r | 0.0591 in1.500 mm |
r1 | 0.0197 in0.500 mm |
da min | 3.0709 in78.000 mm |
da max | 3.3465 in85.000 mm |
Da max | 4.6063 in117.000 mm |
ras max | 0.0591 in1.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Cooper Wiring |
| Model | 5139GY-BOX |
| Brand | Champion |
| Model | 308-10C |
| Brand | Berliss |
| Model | 0005964 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-456052 |
| Brand | Balax |
| Model | 12187-010 |
| Brand | Gates Rubber |
| Model | 2AK20.5/8 |