We never sell your data to third parties
SKF P2BC 108-TPZM 2-bolt corrosion-resistant pillow block bearing unit, 1-1/2 inch shaft, set screw locking. Composite housing with zinc plated insert bearing and extended inner ring. Designed for applications requiring corrosion resistance and reliable shaft support.
MODEL P2BC 108-TPZM
$118.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
For food and beverage applications
Attachment Bolt Diameter
12.7 mm
Basic Dynamic Load Rating
30.7 kN
Basic Static Load Rating
19 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal and flinger on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
137 mm
Centre Height (pillow Block)
49.2 mm
Coating
Zinc-coated bearing
Fastening Bolt Hole Type
Plain
Grease Fitting
Without
Hexagonal Key Size for Set Screw
3.969 mm
Housing
Composite for the SKF Food Line
Housing Overall Width
44 mm
Housing Type
Pillow block
Inner Ring Retaining Feature
Set screws
Limiting Speed
2800 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
2
Pack Height
184 mm
Pack Length
107 mm
Pack Width
63 mm
Relubrication Hole
Without
Rubber Seating Ring
Without
Sealing Type
Contact, gutter
Set Screw
5/16-24 UNF
Set Screw Tightening Torque
6.5 N·m
Shaft Diameter
38.1 mm
Total Bearing Width
49.2 mm
Unit Sealing
Optional end cover
Pillow block ball bearing unit with extended inner ring and set screw locking, composite
Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a composite housing that is lightweight but robust and has excellent corrosion resistance. This variant is suitable for applications with both constant and alternating directions of rotation. It has an inner ring extended on both sides and is locked onto the shaft by tightening a set screw on the inner ring, making it easy to mount.
- Designed for a constant and alternating rotation
- Excellent corrosion resistance
- Lightweight
- Recyclable
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Boston Gear |
| Model | X630-2A-76 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF