We never sell your data to third parties
Timken 32224 spherical roller bearing with 120 mm straight bore, double-row self-aligning design, pressed steel cage (EJ), and general industrial application suitability for gearboxes, conveyors, and machinery requiring high radial load capacity and misalignment compensation.
MODEL 32224
$562.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
0.21 in Cage-cone frontface clearance
5.6 mm
0.22 in Cone backface backing diameter
147 mm
1.9685 in Design unit
Metric Heat generation factor (rib-roller end):68.1 Heat generation factor (roller-raceway):352 Series:32224M Static radial rating:831000 N
187000 lbf T - Bearing Width
61.500 mm
2.2835 in Cup backface backing diameter
191.01 mm
5.31 in Cone part number
X32224M Cone width:58.000 mm
5.79 in Cone frontface backing diameter
135 mm
7.52 in Cup frontface backing diameter
204.98 mm
8.07 in Cup outer diameter
215 mm
8.4646 in Cup part number
Y32224M Cup width:50.000 mm
a - Effective Center Location
-10.2 mm -0.4 in
Aa - Cage-Cone Backface Clearance
5.3 mm 0.21 in
Ab - Cage-Cone Frontface Clearance
5.6 mm 0.22 in
B - Cone Width
58.000 mm 2.2835 in
Bore
120 mm 4.7244 in
C
113000 N 25400 lbf
C0 - Static Radial Rating
831000 N 187000 lbf
C1 - Dynamic Radial Rating (1 million revolutions)
586000 N 132000 lbf
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)
1020000 N 229000 lbf
C90 - Dynamic Radial Rating (90 million revolutions)
152000 N 34100 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)
264000 N 59400 lbf
Cage material
Stamped Steel Cage-cone backface clearance:5.3 mm
Cage Material
Stamped Steel
Cage Type
Stamped Steel
Cage-Cone Backface Clearance
5.3 mm 0.21 in
Cage-Cone Frontface Clearance
5.6 mm 0.22 in
Cg - Geometry Factor
0.121
Cone Backface 'To Clear' Radius
3.050 mm 0.12 in
Cone Backface Backing Diameter
147 mm 5.79 in
Cone Frontface Backing Diameter
135 mm 5.31 in
Cone Part Number
X32224M
Cone Width
58.000 mm 2.2835 in
Cup Backface 'To Clear' Radius
2.54 mm 0.1 in
Cup Backface Backing Diameter
191.01 mm 7.52 in
Cup Outer Diameter
215 mm 8.4646 in
Cup Part Number
Y32224M
Cup Width
50.000 mm 1.9685 in
d - Cone Bore
120 mm 4.7244 in
da - Cone Frontface Backing Diameter
135 mm 5.31 in
db - Cone Backface Backing Diameter
147 mm 5.79 in
DCup Frontface Backing Diameter
204.98 mm 8.07 in
Design Unit
Metric
Design Units
METRIC
Dynamic Radial Rating (1 million revolutions)
586000 N 132000 lbf
Dynamic Radial Rating (90 million revolutions)
152000 N 34100 lbf
Effective Center Location
-10.2 mm -0.4 in
Factor
1.34
Full Timken Part Number
32224
G1 - Heat Generation Factor (Roller-Raceway)
352
G2 - Heat Generation Factor (Rib-Roller End)
68.1
Geometry Factor
0.121
Heat Generation Factor (Rib-Roller End)
68.1
Heat Generation Factor (Roller-Raceway)
352
I.D.
120 mm / 4.7244 in
ISO Factor
1.38
K - Factor
1.34
R - Cone Backface "To Clear" Radius
3.050 mm 0.12 in
Series
32224M
Static Radial Rating
831000 N 187000 lbf
T - Bearing Width
61.500 mm 2.4213 in
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Slew ring bearings, also referred to as slewing bearings, slewing rings, or turntable bearings, are forms of bearings designed to allow rotational motion between several components.
Read More
| Brand | Fulham Lighting |
| Model | FHSBATL6-.6 |
| Brand | Chicago-Latrobe |
| Model | 46918 |
| Brand | NoTrax |
| Model | 193S003500 |
| Brand | Chicago-Latrobe |
| Model | 48718 |
| Brand | Bridgeport |
| Model | LL-43CGC |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more