We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Consolidated Bearings CRSBCE-30 CAM FOLLOWER CROWNED OD ECCENTRIC STUD SEALED
MODEL CRSBCE-30
$57.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Dimension_BD
1 in
Dimension_BL
0.875 in
Dimension_d1
1 in
Dimension_Ecc
0.03 in
Dimension_F
0.1875 in
Dimension_G
42433 in
Dimension_H
0.3125 in
Dimension_I
1.75 in
Dimension_L
2.7812 in
Dimension_TL
0.875 in
I.d.
1.875 in
Width
1 in
- Sealed bearings are pre-lubricated with specially formulated grease and sealed with contact seals, this protects the bearing and lube from contaminants that could cause premature failure; in turn, reducing the frequency of relubrication required in most application conditions
- This can dramatically reduce your maintenance costs and increase bearing life in contaminated environments
- All sealed Cam Followers are prelubricated
- All sealed Cam Followers will have a black oxide finish on all exposed surfaces
- Sizes CRSB(C)E-8-1 and CRSB(C)E-10-1 cannot be relubricated
- Sizes CRSB(C)E-12 through CRSB(C)E-64 have relubrication hole at thread end only
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Hubbell Wiring |
| Model | GFRST15IB |
| Brand | Saginaw Control |
| Model | SCE-12DLP12GALV |
| Brand | SMC |
| Model | ZP10CS |