We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Nachi Bearing 7904CYU/GLP4 Precision Angular Contact Ball Bearing Single Universal 15 20mm Inner Diameter x 37mm Outer Diameter x 9mm Width Precision Angular Contact Ball Bearing
MODEL 7904CYU/GLP4
$102.94 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Type
Cylindrical
Cage Material
PA66 Polyamide Resin
Contact Angle (Deg)
15°
Dynamic Load Capacity (N)
6950
Grease Fill
No Fill
Inner Diameter (mm)
20
Inner Ring Material
JIS SUJ2 Steel
Internal Clearance
N/A
ISO Precision Class
P4
Limiting Speed - Grease (RPM)
35600
Limiting Speed - Oil (RPM)
47700
Max Operating Temp.
120°C (248°F)
Outer Diameter (mm)
37
Outer Ring Material
JIS SUJ2 Steel
Preload
Light
Rolling Element Material
JIS SUJ2 Steel
Seals or Shields
No
Snap Ring
N/A
Static Load Capacity (N)
4350
Universally (Flush) Ground
Yes
Width (mm)
47700
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The direction of the load through the balls forms the contact angle. This Super Precision Angular Contact Ball Bearing is tailored toward the machine tool industry. It is Manufactured to very high quality standards (ISO: Class 4, ABEC7) and has a 15 deg contact angle which is great for very high speed and spindle applications. These bearings are generally used in pairs because axial forces are generated when radial loads are applied. Universal bearings can be arranged in any configuration. These bearings are most commonly used in high speed spindle applications. Low noise. Light preload is standard. High quality bearing steel. Ball guided polyamide cage. Super honed raceways for high accuracy, improved lubrication and extended life. Normally stocked as universal pairs or universal singles. The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. This bearing type is generally used in adjacent positions.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
#312545
Brand
SKF Bearing
Model
71904 CDGA/P4A
#2177594
Brand
FAG Bearing
Model
B71904C.T.P4S.UL
#831012
Brand
NTN Bearing
Model
71904CVUJ74
#5035404
Brand
NSK Bearings
Model
7904CTRSULP4Y
| Brand | Invertek |
| Model | ODP-2-42100-1H04A-MN |
| Brand | FAG Bearing |
| Model | B71926E.T.P4S.DUL |