We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Smith IRR-13/16 INNER RING RACES
MODEL IRR-13/16
Contact supplier for technical support on: 800-932-0076
$12.40 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore Diameter I.D. Nominal
.8125
Bore Diameter I.D. Tolerance
+0.0000/-0.0005
Hole Diameter
1/8
Max. Fillet for Shaft
.040
Outside Diameter Nominal
.9993
Outside Diameter Tolerance
+0.0000/-0.0005
Overall Width
1.010
Overall Width Tolerance
+.000/-.005
SMITH Bearing Number
IRR-13/16
Specifications
| Item Name: | Series IRR Inner Ring Races |
|---|---|
| (A) Bore Diameter ID Nominal: | .8125 in |
| (A) Bore Diameter ID Tolerance: | (+0.0000 -0.0005) in |
| (D) Outside Diameter Nominal: | .9993 in |
| (D) Outside Diameter Tolerance: | (+0.0000 -0.0005) in |
| (W) Width: | 1.010 in |
| (H) Hole Diameter: | 1/8 in |
| (r) Max Fillet for Shaft: | .040 in |
| Tol. Overall Width: | (+.000 -.005) in |
| McGill P/N: | MI–13 |
| RBC P/N: | IR 7194 C |
| Brand | Lubriplate |
| Model | L0096-005 |
| Brand | Boston Gear |
| Model | 30231358 |
| Brand | Hubbell Wiring |
| Model | HBTNSCTRS16BK |
| Brand | Timken |
| Model | 484-90099 |
| Brand | Hydraulic Technologies |
| Model | 9754 |
| Brand | Champion |
| Model | CM95-1/2X16X18 |
| Brand | Cooper Wiring |
| Model | WIU-1HX |
| Brand | Allen Bradley |
| Model | 156-B32AB3 |
Disclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.