We never sell your data to third parties
Koyo 6202 ZZNR is a 62 series single-row deep groove ball bearing with a 15 mm bore. It features double steel shields (ZZ) and a snap ring groove (NR) for axial location. The bearing uses a pressed steel cage and is suitable for electric motors, pumps, and general rotating machinery. 6200 Double Shielded Bearing With Snap Ring
6202ZZNR, 6202 ZZNR, and 6202ZZENR
MODEL 6202 ZZNR
NTN Bearing
$6.16
Call to confirm
Koyo Bearing
$12.71
Nachi Bearing
$8.33
Obsolete
This item is no longer available on MROSupply.com, however we have this identical replacement.
View ReplacementTypically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel
Bore Diameter
15 mm
Cage Material
Pressed Steel
Closure Type
Non-Contact Double Shielded
Dynamic Load Capacity
9.55 kN
Maximum RPM
20000 rpm Grease
Number of Rows
1
O.D.
35 mm
Operating Temperature Range
-30 to 110 deg C
Series
62 Series
Static Load Capacity
3.75 kN
Type
Caged Light
Width
11 mm
- All double sealed and double shielded product come with Polyrex XM Grease
- .
- Available in max capacity or special heat treat (RSH2 in suffix)
- .
- Available in miniature (EE) inch product
- .
- Available with cermamic balls (3NCH or 3NC in prefix)
- .
- Available with seals (2RD, 2RS, 2RU), shields (ZZ), open and/or with a snap ring (NR) options
- .
- Available with steel (no callout) or brass (FY) cage
- .
- Made from premium high carbon, high chromium Japanese steel
- .
- The 2RD Seal is used for high speed and/or reduced drag applications in addition to applications that require maximum sealing ability
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Koyo Bearing |
| Model | 6214 ZZNR |
| Brand | SEW Eurodrive |
| Model | SAF47 DRN80M4 |
