We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Koyo 6204 2RS is a 62 series single-row deep groove ball bearing with a 20 mm bore, 47 mm OD, and 14 mm width. It features double rubber seals (2RS) and a steel cage. Suitable for electric motors, pumps, and general rotating machinery. 6200 Double Sealed Bearing
6204 2RS and 6204-2NSE9C3
MODEL 62042RSC3
Nachi Bearing
$7.18
In stock
Koyo Bearing
$12.88
$12.88 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore
0.787 in / 20 mm
Brand
KOYO
Enclosure Type
Contact Seal
Harmonized Tariff Code
8482.10.50.68
Inch - Metric
Metric
Inner Race Width
0 Inch / 0 Millimeter
Internal Clearance
C0-Medium
Internal Special Features
No
Maximum Capacity / Filling Slot
No
Other Features
Deep Groove
Outer Race Width
0.551 Inch / 14 Millimeter
Outside Diameter
1.85 Inch / 47 Millimeter
Precision Class
ABEC 1 / ISO P0
Rolling Element
Ball Bearing
Snap Ring
No
Type
Single Row Ball Bearings
UNSPSC
31171504
| Bearing No. |
6204 2RS
|
|
| Boundary dimensions(mm) | d |
20
|
| D |
47
|
|
| B |
14
|
|
| r(min) |
1
|
|
| Basic load ratings(kN) | Cr |
16.0
|
| C0r |
6.65
|
|
| Fatigue load limit(kN) | Cu |
0.510
|
| factor | f0 |
13.2
|
| Limiting speeds(min-1) | Grease lub. |
15000
|
| Mounting dimensions(mm) | da(min) |
25
|
| da(max) |
26.5
|
|
| Da(max) |
42
|
|
| ra(max) |
1
|
|
| (Refer.)Mass(Open type)(kg) |
0.106
|
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | NoTrax |
| Model | 146S0035BU |
| Brand | Siemens Motors |
| Model | 1LE22212BA114AA3 |
| Brand | Gates Rubber |
| Model | QD1A15.6/B16.0 |
