We never sell your data to third parties
Koyo 6214 NR is a 62 series single-row deep groove ball bearing with a 70 mm straight bore and a snap ring groove with snap ring included. Open type design for general industrial rotating equipment such as electric motors, pumps, and fans. 6200 Open Bearing With Snap Ring
6214NR, 6214-NR, 6214 NR, and 214SG
MODEL 6214 NR
Nachi Bearing
$73.83
Koyo Bearing
$141.61
Timken
$211.37
MRC Bearing
$94.61
NSK Bearings
$162.22
Call to confirm
$141.61 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bearing Material
Steel
Bearing Type
Deep Groove Ball Bearings
Bore Diameter
70 mm
Cage Material
Steel
Cage Type
Riveted
Closure Type
Open
Dynamic Load Capacity
77.8 kN
Fillet Radius
1.5 mm
Internal Clearance
C0
Locating Feature
Snap Ring (fitted)
Lubricant
Rust Preventative
Maximum RPM
5100 rpm Grease/6100 rpm Oil
Number of Rows
1
O.D.
125 mm
Operating Temperature Range
-30 to 120 deg C
Outer Diameter Type
Straight
Precision class
Class 0
Series
6200
Static Load Capacity
44.1 kN
Type
Round
Width
24 mm
- All double sealed and double shielded product come with Polyrex XM Grease
.
- Available in max capacity or special heat treat (RSH2 in suffix)
.
- Available in miniature (EE) inch product
.
- Available with cermamic balls (3NCH or 3NC in prefix)
.
- Available with seals (2RD, 2RS, 2RU), shields (ZZ), open and/or with a snap ring (NR) options
.
- Available with steel (no callout) or brass (FY) cage
.
- Made from premium high carbon, high chromium Japanese steel
.
- The 2RD Seal is used for high speed and/or reduced drag applications in addition to applications that require maximum sealing ability
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | WorldWide Electric |
| Model | PEWWE5-36-184JM |
| Brand | Dixon Sanitary Fittings |
| Model | B46MP-RK100 |
| Brand | Nachi Bearing |
| Model | 6028-2NSC3 |
| Brand | NTN Bearing |
| Model | 6005LB/5C |
| Brand | Nord Gear |
| Model | SK 9052.1AX - 160MP/4 CUS TW |