We never sell your data to third parties
FAG 6210 deep groove ball bearing with 50mm bore and 90mm OD. This open bearing is designed for high-speed operation and accommodates radial and axial loads. Suitable for electric motors, pumps, and gearboxes. Precision German engineering from Schaeffler. 6200 Open Bearing
6210 and 6210C3
MODEL 6210
Nachi Bearing
$25.53
Koyo Bearing
$41.16
SKF Bearing
$60.07
Timken
$51.54
In stock
NTN Bearing
$54.72
Call to confirm
NSK Bearings
$53.21
In stock
FAG Bearing
$53.94
$53.94 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Bore Type
Straight
Cage Material
Steel
Closure Type
Open
Fillet Radius
1 mm
Finish Coating
Uncoated
I.D.
1.969
Internal Clearance
C0
Max Rpm
10500 rpm
O.D.
3.543
Operating Temperature Range
Maximum of +120°C
Overall Width
20 mm
Precision Rating
Not Rated
Product Type
Radial & Deep Groove Ball Bearings
Radial Dynamic Load Capacity
39000 N
Radial Static Load Capacity
24200 N
Row Type Fill Slot
Single Row Non-Fill Slot
Seal Type
Open
Series
62
Snap Ring Included
Without Snap Ring
Standards Met
DIN 625-1
Specifications
| d | 50 mm |
| D | 90 mm |
| B | 20 mm |
| D 1 | 77, 9 mm |
| D a max | 83 mm |
| d 1 | 62 mm |
| d a min | 57 mm |
| r a max | 1 mm |
| r min | 1, 1 mm |
| Mass | 0, 466 kg | m |
|---|---|---|
| Basic dynamic load rating, radial | 39000 N | C r |
| Basic static load rating, radial | 24200 N | C 0r |
| Limiting speed | 10500 1/min | n G |
| Reference speed | 8200 1/min | n B |
| Fatigue limit load, radial | 1220 N | C ur |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Toshiba |
| Model | Y754SDSR41A-P3 |
| Brand | Bestorq |
| Model | 11/3VK630 |
