We never sell your data to third parties
NTN 6212Z is a 62 series single-row deep groove ball bearing with a 60 mm straight bore. It features a single metal shield (Z) on one side for protection against contaminants while maintaining low friction. Designed for general industrial rotating equipment such as electric motors, pumps, and fans. 6200 Single Shielded Bearing
6212-Z, 6212 Z, and 6212Z
MODEL 6212Z
SKF Bearing
$114.19
Koyo Bearing
$56.20
Timken
$80.51
In stock
NTN Bearing
$102.66
Call to confirm
NSK Bearings
$109.43
In stock
$102.66 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Clearance
CN
Height
4.331
I.D.
60 mm
Length
4.331
Material
Steel
O.D.
110 mm
Width
0.8661
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 7000 RPM |
Limiting Speed - Grease | 6000 RPM |
Precision | ISO Class 0 |
Configuration | One |
Factor | 102.0 |
Radial Internal Clearance | CN |
Static Load Rating | 8100 lbf36000 N36.00 kN |
Dynamic Load Rating | 11800 lbf52500 N52.50 kN |
Enclosure | Single Shielded |
| 1.662 lb0.754 kg | |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 2.3622 in60.000 mm |
D | 4.3307 in110.000 mm |
B | 0.8661 in22.000 mm |
r | 0.0591 in1.500 mm |
r1 | 0.0197 in0.500 mm |
da min | 2.6772 in68.000 mm |
da max | 2.9528 in75.000 mm |
Da max | 4.0157 in102.000 mm |
ras max | 0.0591 in1.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | NSK Bearings |
| Model | 6209VVNR |
