We never sell your data to third parties
NTN 6210ZZ is a 62 series single-row deep groove ball bearing with a 50 mm straight bore. It features double shielded (ZZ) steel shields for protection against contaminants. Suitable for electric motors, pumps, fans, and general rotating machinery. 6200 Double Shielded Bearing
6210ZZ, 6210 ZZ, 6210-ZZ, 6210-2Z, and 6210ZZEC3
MODEL 6210ZZ
Nachi Bearing
$29.00
In stock
Koyo Bearing
$42.34
SKF Bearing
$74.02
Timken
$67.59
NTN Bearing
$72.37
Call to confirm
NSK Bearings
$75.46
In stock
$72.37 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Clearance
CN
Height
3.543
I.D.
50 mm
Length
3.543
Material
Steel
O.D.
90 mm
Width
0.7874
Technical Specifications
Type | Deep Groove Ball Bearing |
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Grease | 7100 RPM |
Seal Type | None |
Seal Material | None |
Precision | ISO Class 0 |
Configuration | One |
Factor | 14.4 |
Radial Internal Clearance | CN |
Static Load Rating | 5200 lbf23200 N23.20 kN |
Dynamic Load Rating | 7850 lbf35000 N35.00 kN |
Enclosure | Double Shielded |
| 1.003 lb0.455 kg | |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 1.9685 in50.000 mm |
D | 3.5433 in90.000 mm |
B | 0.7874 in20.000 mm |
r | 0.0433 in1.100 mm |
r1 | 0.0197 in0.500 mm |
da min | 2.2244 in56.500 mm |
da max | 2.3622 in60.000 mm |
Da max | 3.2874 in83.500 mm |
ras max | 0.0394 in1.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
