We never sell your data to third parties
NTN 6206Z is a 62 series single-row deep groove ball bearing with a 30 mm straight bore. It features a single Z-type steel shield on one side for protection against contaminants. This bearing is designed for general industrial applications including electric motors, pumps, and fans. 6200 Single Shielded Bearing
6206-Z, 6206 Z, and 6206Z
MODEL 6206Z
SKF Bearing
$24.78
Koyo Bearing
$16.78
NTN Bearing
$22.21
Call to confirm
NSK Bearings
$22.17
In stock
OBSOLETE
Please call 888-671-2883 for Replacement info
Typically Ships in: 1 day
Returnable:No
Clearance
CN
Height
2.441
I.D.
30 mm
Length
2.441
Material
Steel
O.D.
62 mm
Width
0.6299
Technical Specifications
Type | Deep Groove Ball Bearing |
|---|---|
Bore Type | Round |
Material | High Carbon Chrome Steel |
Cage Type | Pressed |
Cage Material | Steel |
Ball Material | Steel |
Limiting Speed - Oil | 13000 RPM |
Limiting Speed - Grease | 11000 RPM |
Precision | ISO Class 0 |
Configuration | One |
Factor | 57.0 |
Radial Internal Clearance | CN |
Static Load Rating | 2540 lbf11300 N11.30 kN |
Dynamic Load Rating | 4400 lbf19500 N19.50 kN |
Enclosure | Single Shielded |
| 0.421 lb0.191 kg | |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
|
| |
d | 1.1811 in30.000 mm |
|---|---|
D | 2.4409 in62.000 mm |
B | 0.6299 in16.000 mm |
r | 0.0394 in1.000 mm |
r1 | 0.0197 in0.500 mm |
da min | 1.3780 in35.000 mm |
da max | 1.5354 in39.000 mm |
Da max | 2.2441 in57.000 mm |
ras max | 0.0394 in1.000 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | NSK Bearings |
| Model | 6209VVNR |
