Image for Illustration purposes only. Actual product may vary
- BRAND: SKF Bearing
- SKU: 320569
- CONDITION: NEW
- MODEL: 6204
- Typically ships in: 1 day
- Weight: 0.2 lb
- Free shipping on orders over $20
- Payment methods:
- Unit of Measure: EA
Select Quantity (minimum 4)
Yet such flanges are extremely expensive to produce. A more economical arrangement of the bearing outer ring, with advantages that are similar, is a snap ring groove at both or either ends of the outside diameter. The snap ring presumes the function of a flange.
Cages are commonly used to fix the spheres in a Conrad-design ball bearing. In other building types the amount of spheres may decrease determined by the particular cage contour, and thereby reduce the load capacity. Without cages slipping of two convex surfaces on each other stabilizes the tangential situation. With a cage a slipping of a convex surface stabilizes the tangential place in a coordinated concave surface, which has lower friction and prevents scores.
This reduces skidding and centrifugal loading, so 20% to 40% quicker cans work than standard bearings. What this means is the outer race groove uses less force as the bearing spins inward against the ball. This decrease in force reduces rolling resistance and the friction. The balls that are lighter uses less energy to keep its rate, and let the bearing to spin faster.
|Attribute Name||Attribute Value|
|Inner Diameter (mm)||20.000|
|Outer Diameter (mm)||47.000|
|Locating Feature Bearing||None|
|Lubricant (in Bearing)||None|
|Radial Internal Clearance||C0|
|O.D.||1 6/7 in|
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF