We never sell your data to third parties
Timken 6212-2RS-NR is a deep groove ball bearing with a 60 mm bore and a light series 62 design. It features contact rubber seals (2RS) on both sides for protection and a snap ring groove (NR) on the outer diameter for simplified axial location. This bearing has a normal (C0) radial clearance, a dynamic load rating of 47.8 kN, and a static load rating of 32.9 kN. It is suitable for general industrial applications such as electric motors, pumps, and conveyors. 6200 Double Sealed Bearing With Snap Ring
6212 2RSNR and 6212-2RS-NR
View suggested Nachi Bearing alternative
Save $79.40 on MROSupply.com preferred brand for this item - Nachi Bearing 6212-2NSENR
MODEL 6212-2RS-NR
Koyo Bearing
$132.48
Timken
$139.57
$139.57 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
158000 lbf Superseded part
24028CJW33C3
2.7165 in Lubrication type
Standard Grease O.D. (in):210 mm 8.2677 Outer ring to clear radius:0.080 in Outer ring backing diameter:195 mm
2.7165 in Reference thermal speed rating (grease)
1800 rpm Reference thermal speed rating (oil):2100 Static radial rating:702000 N
238000 lbf Geometry factor
0.0813 ISO factor:3.51 Inner ring to clear radius:0.080 in Inner ring backing diameter:154 mm
6.1000 in Inner ring width
69 mm
7.700 in Outer ring width
69 mm
Bearing Type
Standard DGBB
Bore
60 mm
Bore Size d
60 mm
C0r - Static Load Rating
32900 N
Cage material
Steel Cage type:EJ Design unit:Metric Dynamic radial rating (two-rows):1060000 N
Clearance
C0 (Normal)
Cr - Dynamic Load Rating
47800 N
Dynamic load rating
47.8 kN
Features
Contact Seals With Snap Ring
Grease reference speed
6500 rpm
Grease Reference Speed
6500 rpm
Oil reference speed
9300 rpm
Oil Reference Speed
9300 rpm
Outside Diameter D
110 mm
Outside Ring Width B
22.0 mm
Radius Rs min
1.5 mm
Snap Ring Diameter D2 max
116.600 mm
Snap Ring Width f max
2.460 mm
Static load rating
32.9 kN
Timken’s deep groove ball bearings deliver reliable performance in a wide range of applications and conditions. With super-finished raceways and controlled geometries, our premium design helps ensure consistent quality.
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
What are the dimensions and typical uses of a 6200 series ball bearing?
A standard 6200 ball bearing has: • 10 mm bore • 30 mm outer diameter • 9 mm width The 6200 series sits within the deep groove ball bearing family and is designed for light to moderate loads at relatively high speeds. You’ll typically find them in electric motors, small gearboxes, pumps, and general industrial equipment. They’re popular because they’re compact, widely available, and cost effective. Different variants exist such as sealed, shielded, or high clearance versions, depending on the application.
What is the difference between deep groove and angular contact ball bearings?
Deep groove ball bearings are the most common type. They’re designed to handle mainly radial loads, but they can also take some axial load in both directions. They’re simple, versatile, and used in everything from motors to conveyors. Angular contact ball bearings are built for combined loads, especially where there’s significant axial force in one direction. They’re often used in pairs and are common in higher precision or higher load applications like pumps and gearboxes. If your load is mostly radial, go deep groove. If axial load matters more, angular contact is usually the better choice.
| Brand | Superlok |
| Model | SINVI2-S4-RS-PE-KH |
| Brand | FYH Bearing |
| Model | NAHA215 75MM |
| Brand | Jason Industrial |
| Model | 4103-0050-328 |
| Brand | WEG |
| Model | 05036OP3JFP324TS-W40 |
| Brand | WEG |
| Model | 01018ET3HHW215TC-S |
SKU: 5066946
Best company to buy from
I always buy from MRO is a very reliable company to work with
Read more