Flexco - MROSupply.com

#155592

Flexco 30481 5552 Quick Change Chuck belt maintenance tool enables rapid swapping of driver bits during conveyor belt splicing operations. Compatible with Tatch-A-Cleat mechanical cleats and Flexco fastener sizes 375X, 550, 1-1/2, 190, 140, 2, 2-1/2, 2-1/4, 3, and 1, this chuck reduces downtime in fastener installation and maintenance tasks.

Marca	Flexco
Modelo	30481

Añadir al carrito para ver el precio

Free Shipping orders over $100

#155608

Flexco 31993 FSK-1S replacement sprocket for the FSK1 manual belt skiver. Drives the skiving blade during conveyor belt cover removal for mechanical fastener installation. Designed for precise skiving to prepare belt ends for splicing in belt maintenance applications.

Marca	Flexco
Modelo	31993

$65.00 Cada

Free shipping

#155734

Flexco 70023 B437 Alligator V-belt fastener set for size B V-belts, steel construction with 10 fastener sets and 10 rocker pins included. Hinge pin included for light-duty V-belt splicing applications.

Marca	Flexco
Modelo	70023

Añadir al carrito para ver el precio

Free Shipping orders over $100

#155817

Flexco UX1S12 (01179) Clipper Unibar wire hook belt splice for light-duty conveyor belts 1/8 to 5/32 in (3.2 to 4.0 mm) thick. 12 in (300 mm) strip length, 430 stainless steel construction, 144 hooks per box (12 cards of 96 hooks). Requires 0.065 in (1.7 mm) hinge pin (not included). Minimum pulley diameter 2 in (50 mm).

Marca	Flexco
Modelo	01179

Añadir al carrito para ver el precio

Free shipping

#155818

Flexco 01184 UX1SPS12 Clipper Unibar wire hook belt splice for light-duty conveyor belts 1/16-1/8 in thick. 12 in strip length, 430 stainless steel construction, 144 hooks per box (12 strips of 96 hooks). Requires 0.065 in hinge pin (not included). Minimum pulley diameter 2 in.

Marca	Flexco
Modelo	01184

Añadir al carrito para ver el precio

Free shipping

#155851

Flexco UX1S24 01356 Clipper Unibar wire hook belt splice for light-duty conveyor belts 1/8 to 5/32 in thick. 24 in strip length, 430 stainless steel, 0.040 in wire diameter. Box of 10 strips, 188 hooks per strip, 240 lacing inches total. Requires 0.065 in hinge pin, not included. Minimum pulley diameter 2 in.

Marca	Flexco
Modelo	01356

Añadir al carrito para ver el precio

Free shipping

#155967

Flexco 02598 NY065-C Nylosteel hinge pin, 0.065 in (1.7 mm) diameter, supplied in a 100 ft dispenser pak. This flexible nylon-coated steel cable pin is designed for use with Flexco hinged belt splices, providing a durable and corrosion-resistant hinge joint for conveyor belt fastening applications.

Marca	Flexco
Modelo	02598

Añadir al carrito para ver el precio

Free shipping

#155971

Flexco 02628 NY093-C Nylosteel hinge pin, 0.093 in (2.4 mm) diameter, supplied in a 100 ft dispenser pak for conveyor belt splices. The Nylosteel material combines flexibility with corrosion resistance, suitable for light- to medium-duty hinged splices in package handling, food processing, and general conveying applications.

Marca	Flexco
Modelo	02628

Añadir al carrito para ver el precio

Free shipping

#155972

Flexco 02649 NYS065-C Nylostainless hinge pin for conveyor belt splices, 0.065 in (1.7 mm) diameter, supplied in a 100 ft dispenser pak. The Nylostainless material provides corrosion resistance and smooth hinge action for light-duty belt fasteners.

Marca	Flexco
Modelo	02649

Añadir al carrito para ver el precio

Free shipping

#155976

Flexco 02670 NYS093-C Nylostainless hinge pin is a solid nylon pin with a stainless steel coating, designed for use with Flexco hinged belt splices. This pin measures 0.093 in (2.4 mm) in diameter and is supplied in a 100 ft dispenser pak for convenient field installation. The Nylostainless material provides corrosion resistance and smooth hinge action.

Marca	Flexco
Modelo	02670

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156034

Flexco 03370 RL-24 roller lacer clip lacing accessory for installing Clipper wire hooks on conveyor belts up to 24 in wide. Provides consistent hook closure across the belt width for reliable splicing.

Marca	Flexco
Modelo	03370

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156035

Flexco 03371 RL-36 roller lacer for installing Clipper wire hooks on conveyor belts up to 36 in wide. Provides consistent pressure for secure hook embedding in light- to medium-duty belt splicing applications.

Marca	Flexco
Modelo	03371

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156036

Flexco 03372 RL-48 roller lacer clip lacing accessory for 48 in belt widths. Facilitates installation of Clipper wire hook lacing on light- to medium-duty conveyor belts.

Marca	Flexco
Modelo	03372

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156037

Flexco 03375 RL-60 roller lacer clip lacing accessory for installing Clipper wire hooks on conveyor belts up to 60 in wide. Provides consistent, uniform hook insertion across the belt width for reliable light- to medium-duty splices.

Marca	Flexco
Modelo	03375

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156425

Flexco 15006 ARTK-7 Alligator Rivet Installation Tool Kit includes a hand applicator for installing Alligator rivet belt fasteners. The 7 in (175 mm) kit provides tooling for field installation of rivet-style splices on light- to medium-duty conveyor belts.

Marca	Flexco
Modelo	15006

$584.19 Cada

Free Shipping orders over $100

#156451

Flexco U2S12 18400 Clipper Unibar wire hook belt splice for light-duty conveyor belts 5/32 to 3/16 in thick. 12 in strip length, 430 stainless steel construction, 84 hooks per strip, 12 strips per box (144 hooks total). Requires 0.093 in hinge pin, not included. Minimum pulley diameter 2 in.

Marca	Flexco
Modelo	18400

Añadir al carrito para ver el precio

Free shipping

#156459

Flexco U2S24 18477 Clipper Unibar wire hook belt splice for light-duty conveyor belts 5/32-3/16 in (4.0-4.8 mm) thick. 24 in (600 mm) strip length, 430 stainless steel construction, 162 hooks per strip, 10 strips per box. Requires 0.093 in (2.4 mm) hinge pin (not included). Minimum pulley diameter 2 in (50 mm).

Marca	Flexco
Modelo	18477

Añadir al carrito para ver el precio

Free shipping

#156500

Flexco 20000 140E solid plate belt fastener for conveyor belts 3/16 to 7/16 in (5 to 11 mm) thick. Steel construction with a mechanical fastener rating of 40 kN/m (225 PIW). Minimum pulley diameter 14 in (360 mm). Package includes 25 fastener sets per box.

Marca	Flexco
Modelo	20000

Añadir al carrito para ver el precio

Free shipping

#156501

Flexco 20001 190E bolt solid plate belt splice for 5/16-9/16 in (8-14 mm) thick conveyor belts. Steel construction with 65 kN/m (375 PIW) mechanical fastener rating and 18 in (460 mm) minimum pulley diameter. Includes 25 fastener sets per box. Designed for heavy-duty cover-handler applications in mining and aggregate.

Marca	Flexco
Modelo	20001

Añadir al carrito para ver el precio

Free shipping

#156504

Flexco 20005 2E solid plate belt fastener for heavy-duty conveyor belts, 9/16-13/16 in (14-21 mm) belt thickness, steel construction, 440 PIW (75 kN/m) rating, 30 in (760 mm) minimum pulley diameter. Package includes 25 fastener sets per box.

Marca	Flexco
Modelo	20005

Añadir al carrito para ver el precio

Free shipping

#156510

Flexco 20012 140C solid plate belt fastener for conveyor belts 3/16 to 7/16 in (5 to 11 mm) thick. Steel construction with a minimum pulley diameter of 14 in (360 mm) and a mechanical fastener rating of 40 kN/m (225 PIW). Supplied as 100 fastener sets per bucket.

Marca	Flexco
Modelo	20012

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156511

Flexco 20013 190C bolt solid plate belt splice for conveyor belts 5/16-9/16 in (8-14 mm) thick. Steel construction with 65 kN/m (375 PIW) mechanical fastener rating. Minimum pulley diameter 18 in (460 mm). Supplied as 100 fastener sets per bucket.

Marca	Flexco
Modelo	20013

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156538

Flexco 20091 190EE bolt solid plate belt splice for conveyor belts 5/16-9/16 in (8-14 mm) thick. Everdur silicon bronze construction with 375 PIW (65 kN/m) rating. Minimum pulley diameter 18 in (460 mm). Includes 25 fastener sets per box. Part of the 190 Series cover handler family for rubber-covered belts.

Marca	Flexco
Modelo	20091

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156597

Flexco 30392 LSHDS Far-Pul HD belt clamp replacement parts, steel construction for heavy-duty conveyor belt maintenance. Scissor-style clamp securely holds belts during splicing and repair operations.

Marca	Flexco
Modelo	30392

$304.00 Cada

Free Shipping orders over $100

#156618

Flexco 30447 HW1 power wrench for installing 375X/550 bolt hinged belt fasteners with 1/4 in bolt hole diameter. Compatible with Flexco bolt solid sizes 1, 140, 190, and RP1. Green-coded tool for use with hinged rivet and bolt hinged splice systems in conveyor belt maintenance.

Marca	Flexco
Modelo	30447

Añadir al carrito para ver el precio

Free shipping

#156619

Flexco 30448 HW2 power wrench designed for installing rip repair fasteners in sizes 1-1/2, 2, 2-1/4 and RP2. Features a 5/16 in bolt hole diameter. This tool is used with Flexco bolt-type fasteners for conveyor belt repair and maintenance.

Marca	Flexco
Modelo	30448

Añadir al carrito para ver el precio

Free shipping

#156624

Flexco 30463 HP1 power punch belt maintenance tool for 375X/550 bolt hinged and 1,140,190 & RP1 bolt solid plate fasteners. Punches 1/4 in bolt holes during mechanical splice installation. Compatible with Flexco hinged rivet and solid plate lacing systems for conveyor belt splicing.

Marca	Flexco
Modelo	30463

Añadir al carrito para ver el precio

Free shipping

#156625

Flexco 30464 HP2 power punch for belt fastener installation accommodates fastener sizes 1-1/2, 2, 2-1/4 and RP2 with a 5/16 in bolt hole diameter. Designed for use with Flexco bolt solid plate and bolt hinged fasteners to create clean, accurate bolt holes in conveyor belting.

Marca	Flexco
Modelo	30464

Añadir al carrito para ver el precio

Free shipping

#156626

Flexco 30465 HP3 power punch for installing Size 2-1/2 and 3 bolt solid plate fasteners with 3/8 in bolt hole diameter. Designed for heavy-duty conveyor belt splicing applications using Flexco bolt solid plate splices.

Marca	Flexco
Modelo	30465

Añadir al carrito para ver el precio

Free shipping

#156628

Flexco 30474 110 bolt breaker for use with 375X/550 bolt hinged and 1, 140, 190, and RP1 bolt solid plate fasteners. Features a 1/4 in bolt hole diameter and is packaged 2 per package. This belt maintenance tool is designed to break bolts during fastener installation or removal.

Marca	Flexco
Modelo	30474

Añadir al carrito para ver el precio

Free shipping

#156770

Flexco 30889 FL11C Flexco-Lok belt tape, 11/16 in wide, 100 ft per carton, for use with Flexco bolt solid plate fasteners in sizes 190, 1-1/2, 2, and 2-1/4. Applied between the belt and fastener plates to seal the splice and prevent material ingress.

Marca	Flexco
Modelo	30889

Añadir al carrito para ver el precio

Free shipping

#156809

Flexco 31991 FSK-1R belt skiving tool for removing conveyor belt cover prior to fastener installation. Includes two springs, 5/6 socket drive, and ratchet. Skiver not included. Compatible with Flexco mechanical belt fastening systems.

Marca	Flexco
Modelo	31991

$237.00 Cada

Free Shipping orders over $100

#156814

Flexco 32268 840848 belt cutter is a complete cutter assembly designed for conveyor belt maintenance. It accommodates belt widths up to 48 in, providing a clean, square cut for efficient splicing and repair. This tool is suitable for use with various Flexco mechanical belt fasteners and is an essential component for belt preparation in mining, aggregate, and bulk handling applications.

Marca	Flexco
Modelo	32268

Añadir al carrito para ver el precio

Free Shipping orders over $100

#156824

Flexco 32278 845872LD Clipper 845 belt cutter for 72 in belt widths. Provides clean, square cuts on conveyor belting for efficient splicing preparation. Designed for use with light- to medium-duty belts in package handling, food processing, and general industrial applications.

Marca	Flexco
Modelo	32278

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157003

Flexco 40005 375XJ24NC 375X Series hinged rivet plate belt splice for medium-duty conveyor belts 1/4-13/32 in thick. 24 in belt width, steel plate, nylon-covered steel cable hinge pin. 33 kN/m (190 PIW) rating, 6 in minimum pulley diameter.

Marca	Flexco
Modelo	40005

Añadir al carrito para ver el precio

Free shipping

#157005

Flexco 40007 375XJ30NC hinged rivet plate belt splice for medium-duty conveyor belts 1/4-13/32 in thick. 30 in belt width, steel plate, nylon-covered steel cable hinge pin. 33 kN/m (190 PIW) rating, 6 in minimum pulley diameter.

Marca	Flexco
Modelo	40007

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157006

Flexco 40008 375XJ36NC hinged rivet plate belt splice for medium-duty conveyor belts 1/4 to 13/32 in thick. Steel plate construction with 1/4 in nylon-covered steel cable hinge pin. 36 in belt width, 6 in minimum pulley diameter, 33 kN/m (190 PIW) rating.

Marca	Flexco
Modelo	40008

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157027

Flexco 40049 550J30NC 550 Series hinged rivet plate belt splice for medium-duty conveyor belts 1/4 to 5/8 in thick. Steel plate with nylon-covered steel cable hinge pin. 30 in belt width, 9 in minimum pulley diameter, 52 kN/m (300 PIW) rating.

Marca	Flexco
Modelo	40049

Añadir al carrito para ver el precio

Free shipping

#157499

Flexco 54520 RS125J24/600NC Alligator Ready Set staple belt splice for 24 in (600 mm) wide conveyor belts. Steel construction with nylon-covered steel cable hinge pin. Rated 28 kN/m (160 PIW) for belts 1/8-3/16 in thick. Minimum pulley diameter 3 in (75 mm). Hinge pin diameter 0.141 in (3.6 mm).

Marca	Flexco
Modelo	54520

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157501

Flexco 54522 RS125J36/900NC Alligator Ready Set staple belt splice for 36 in (900 mm) wide conveyor belts. Steel construction with 28 kN/m (160 PIW) rating. Accepts belt thickness 1/8-3/16 in (3.2-4.8 mm) and operates on minimum 3 in (75 mm) pulley diameter. Includes nylon-covered steel cable hinge pin (0.141 in / 3.6 mm diameter).

Marca	Flexco
Modelo	54522

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157519

Flexco 54542 RS125SJ24/600SS Alligator Ready Set staple belt splice for 24 in (600 mm) wide belts 1/8-3/16 in thick. 316 stainless steel plate with 0.141 in (3.6 mm) stainless spring wire hinge pin. Rated 28 kN/m (160 PIW) with 3 in (75 mm) minimum pulley diameter. Pre-assembled staple design speeds installation on light- to medium-duty conveyor belts in food processing, package handling, and other applications requiring corrosion resistance.

Marca	Flexco
Modelo	54542

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157544

Flexco 54592 RS187J24/600NC Alligator Ready Set staple belt splice for 24 in (600 mm) belt width, 3/16-1/4 in (4.8-6.4 mm) belt thickness, and 35 kN/m (200 PIW) rating. Steel construction with 0.203 in (5.2 mm) nylon-covered steel cable hinge pin. Minimum pulley diameter 4 in (100 mm).

Marca	Flexco
Modelo	54592

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157576

Flexco 54627 RSC187-4 Alligator staple lacing installation tool for RS62, RS125, and RS187 fasteners. Tool width is 4 inches. Designed for light- to medium-duty conveyor belt splicing in package handling, food processing, and general industrial applications.

Marca	Flexco
Modelo	54627

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157577

Flexco 54628 RSC187-6 Alligator staple lacing installation tool for RS62, RS125, and RS187 fasteners, 6 in tool width. Designed for light- to medium-duty conveyor belt splicing with Alligator Ready Set staple lacing systems.

Marca	Flexco
Modelo	54628

Añadir al carrito para ver el precio

Free Shipping orders over $100

#157606

Flexco 76469 FL-M Flex-Lifter belt lifter for medium-duty conveyor belts 36 to 60 inches wide. This belt maintenance tool lifts and positions belts during splicing and repair, reducing manual effort and improving safety in mining, aggregate, and bulk handling applications.

Marca	Flexco
Modelo	76469

$4,595.00 Cada

Free Shipping orders over $100

#782648

Flexco 04073 Complete SmartClamp Set belt maintenance tool for conveyor belt splicing. Provides secure clamping during splice installation with Flexco mechanical belt fastening systems, ensuring accurate alignment and consistent fastener placement. Includes all components for operation with compatible Flexco applicators.

Marca	Flexco
Modelo	04073

Añadir al carrito para ver el precio

Free Shipping orders over $100

#782653

Flexco 04143 900936 900 Series belt cutter for 36 in wide conveyor belts. Provides clean, square cuts for mechanical belt splicing preparation. Designed for use with rubber and PVC conveyor belting.

Marca	Flexco
Modelo	04143

Añadir al carrito para ver el precio

Free Shipping orders over $100

#782654

Flexco 04144 900948 manual belt cutter for conveyor belting up to 48 in wide. Provides clean, square cuts for efficient belt splicing and repair. Designed for use with Flexco belt maintenance tools.

Marca	Flexco
Modelo	04144

Añadir al carrito para ver el precio

Free Shipping orders over $100

#782655

Flexco 04145 900960 900 Series belt cutter for 60-inch wide conveyor belts. Provides clean, square cuts for belt maintenance and splicing preparation. Designed for use with Flexco mechanical fastening systems.

Marca	Flexco
Modelo	04145

Añadir al carrito para ver el precio

Free Shipping orders over $100

#782672

Flexco 08003 AERO-1200 splice press conveyor accessory for mechanical belt splicing. Provides uniform pressure during fastener installation for consistent splice quality with Flexco hinged and solid-plate fasteners in mining, aggregate, and bulk handling applications.

Marca	Flexco
Modelo	08003

$17,893.95 Cada

Free Shipping orders over $100

#782673

Flexco 08004 AERO-1500 Novitool Aero portable splice press for on-site conveyor belt vulcanization. Provides consistent heat and pressure for creating durable vulcanized splices on conveyor belts in mining, aggregate, and bulk handling applications.

Marca	Flexco
Modelo	AERO-1500

$28,021.55 Cada

Free Shipping orders over $100

#782763

Flexco 30001 EBC1 electric belt cutter for cutting conveyor belts. This power tool is designed for efficient belt maintenance and preparation for splicing. The EBC1 cutter provides clean, straight cuts to simplify fastener installation.

Marca	Flexco
Modelo	30001

$7,168.00 Cada

Free Shipping orders over $100

#782764

Flexco 30002 EBC2 electric belt cutter for conveyor belt preparation and splicing maintenance. This power tool simplifies cutting tasks in belt splicing operations.

Marca	Flexco
Modelo	30002

$8,507.00 Cada

Free Shipping orders over $100

#782805

Flexco 31996 FSK-1B replacement skiver blade for the FSK1 manual belt skiver. Standard blade removes top cover from conveyor belts prior to mechanical fastener installation. Compatible with Flexco FSK1 skiving tools for belt maintenance.

Read 1 review

Marca	Flexco
Modelo	31996

$193.00 Cada

Free Shipping orders over $100

#782806

Flexco 31999 FSK-1BA replacement skiver blade for the FSK1 manual belt skiver. High-wear blade designed for removing conveyor belt covers during mechanical fastener installation. Compatible with Flexco FSK1 skiving tools.

Marca	Flexco
Modelo	31999

$435.00 Cada

Free Shipping orders over $100

#2565441

Flexco 30018 CEBC1 cordless electric belt cutter for clean, square cuts on conveyor belts. Includes rechargeable battery and charger for portable operation. Designed for use with Flexco belt maintenance tools across a range of belt thicknesses.

Marca	Flexco
Modelo	30018

$7,845.00 Cada

Free Shipping orders over $100

#2565446

Flexco 30373 LSHDCBS replacement clamp bar screw for Far-Pul HD belt clamps. Genuine Flexco replacement part designed for use with Far-Pul HD belt clamping tools in conveyor belt maintenance and splicing applications.

Marca	Flexco
Modelo	30373

$149.00 Cada

Free Shipping orders over $100

#5023021

Flexco 56101 TGB-4/102-2/2-36/914 segmented transfer plate for 36 in (914 mm) belt width with 4 in (102 mm) transfer width. Steel mounting bar with segmented transfer fingers bridges belt-to-belt or chute-to-belt transitions in horizontal-to-horizontal or waterfall applications.

Marca	Flexco
Modelo	56101

$520.00 Cada

Free Shipping orders over $100

#5787907

Flexco 09002 AERO-1225 vulcanizing press for conveyor belt splicing, 48 in (1225 mm) belt width. Provides uniform heat and pressure for vulcanized belt repairs and splices in mining, aggregate, and bulk handling applications.

Marca	Flexco
Modelo	09002

Obsoleto

Ver reemplazo

#5977491

Flexco 30021 CEBC1-220 cordless electric belt cutter for cutting conveyor belting. Operates on 220V power supply. Designed for efficient and precise belt cutting in maintenance applications.

Marca	Flexco
Modelo	30021

$8,079.00 Cada

Free Shipping orders over $100