We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 120138 Type E Quick Disconnect (QD) bushing with 42mm (1.654 in) finished bore and 12x3.3mm keyway. Cast iron construction, rated for 20,000 lbf torque. Three-bolt flange design for secure shaft mounting in power transmission applications.
MODEL 120138
Contact supplier for technical support on: +1-864-284-5700
$121.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore diameter actual
42.0000 mm, 1.654 in
Bore length
2.6300 in, 66.802 mm
Bushing size
E
Bushing type
QD
I.D.
42 mm
Installation torque
720 in/lb, 720.0 in/lb
Integral key
No
Keyway
12 x 3.3 mm
Keyway size
12 X 8
Material
Cast iron, class 30
Number of bolts
3
Rated Torque
20000.0000 lbf, 88964.432 N
Shaft attachment
Finished bore
QD Bushings features and Benefits
- 4 Degree Taper
- Easy on/Easy off
- Manufactured precisely to industry standards
- Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
- QD is a registered trademark of Emerson Electric
Conventional Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange first
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design
Reverse Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
IMPORTANT!
Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read more
| Brand | Browning |
| Model | 380J10 |
| Brand | Cleveland |
| Model | C40405 |
| Brand | Cleveland |
| Model | C32775 |
| Brand | Cleveland |
| Model | C75338 |
| Brand | Wiegmann |
| Model | SC060804GNK |
| Brand | Drillco |
| Model | 174F22423 |
| Brand | Kipp |
| Model | K0395.5A6 |
| Brand | Cleveland |
| Model | C40364 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/