We never sell your data to third parties
Dodge 120508 Type E Quick Disconnect (QD) bushing with 2-1/8" bore and 1/2" x 1/4" keyway, manufactured from ductile iron for high strength and durability. Designed for secure shaft mounting in power transmission applications, this QD bushing provides easy installation and removal with a split taper design that ensures a tight, concentric fit on driven shafts.
MODEL 120508
Contact supplier for technical support on: +1-864-284-5700
$121.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore diameter actual
2.1250 in, 53.975 mm
Bore length
2.6300 in, 66.802 mm
Bushing size
E
Bushing type
QD
I.D.
2-1/8 in
Installation torque
720 in/lb, 720.0 in/lb
Integral key
No
Keyway
1/2 in x 1/4 in
Keyway size
0.5 X 0.5
Material
Cast iron, class 30, Material:Ductile Iron
Number of bolts
3
Rated Torque
20000.0000 lbf, 88964.432 N
Shaft attachment
Finished bore
QD Bushings features and Benefits
- 4 Degree Taper
- Easy on/Easy off
- Manufactured precisely to industry standards
- Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
Conventional Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange first
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design
Reverse Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
IMPORTANT!
Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at
How does Dodge warranty evaluation work if a product fails?
Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.
#338479
Brand
TB Woods
Model
E218
#390708
Brand
U.S.Tsubaki
Model
E-2B
| Brand | LS Electric |
| Model | LSLV0002M100-1EOFNA |
| Brand | LS Electric |
| Model | LSLV0900H100-5COND(PLUS) |
| Brand | LS Electric |
| Model | LSLV1600H100-4COFD(PLUS) |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/