We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 117534 SD Quick Disconnect (QD) bushing, 30mm bore with 8x3.3mm keyway, sintered steel construction. Rated for 5000 lbf torque, 108 in/lb installation torque. For industrial power transmission applications.
MODEL 117534
Contact supplier for technical support on: +1-864-284-5700
$47.38 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore diameter actual
30.0000 mm, 1.181 in
Bore length
1.8100 in, 45.974 mm
Bushing size
SD
Bushing type
QD
I.D.
30 mm
Installation torque
108 in/lb, 108.0 in/lb
Integral key
No
Keyway
8 x 3.3 mm
Keyway size
8 X 7
Material
Sintered steel
Number of bolts
3
Rated Torque
5000.0000 lbf, 22241.108 N
Shaft attachment
Finished bore
QD Bushing - Metric Bore/Metric Hardware
- DODGE QD-style bushings stocked in popular finish bore sizes and minimum plain bore, for custom reboring
- DODGE Metric QD bushings supplied with metric hex-head cap screws and lock washers
- Stock reborable bushings available for custom reboring
- Reboring and sawsplit available from DODGE for nominal extra charge
- Can be used with DODGE HTD sprockets for conventional mounting only (English thread hardware required for demounting.)
NOTE: Rebore by others must be sawsplit after rebore
QD Bushings features and Benefits
- 4 Degree Taper
- Easy on/Easy off
- Manufactured precisely to industry standards
- Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
Conventional Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange first
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design
Reverse Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
IMPORTANT!
Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read more
| Brand | Cleveland |
| Model | C60070 |
| Brand | Schunk |
| Model | 423104 |
| Brand | Schunk |
| Model | 224453 |
| Brand | Cleveland |
| Model | C60002 |
| Brand | Hammond Power Solutions |
| Model | PH500AR |
| Brand | Kipp |
| Model | K0316.A3 |
| Brand | Kipp |
| Model | K0395.4A4 |
| Brand | Champion |
| Model | 700T-29/64 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreSKU: 117869
Great price/great product
Shipping was fast and the price was best I could find. Product was new in a the sealed Dodge box. Perfect.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/