We never sell your data to third parties
Dodge 121154 H split taper bushing with 32mm bore. Steel construction for secure shaft mounting in industrial power transmission applications. Split taper design provides a tight, concentric grip on the shaft, ideal for mounting pulleys, sheaves, and sprockets.
MODEL 121154
Contact supplier for technical support on: +1-864-284-5700
$18.89 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore diameter actual
32.0000 mm, 1.26 in
Bore length
1.2813 in, 32.545 mm
Bushing size
H
Bushing type
Light Duty
I.D.
32 mm
Installation torque
90 in/lb, 90.0 in/lb
Integral key
No
Keyway size
10 X 7
Material
Steel
Number of bolts
2
Rated Torque
1000.0000 lbf, 4448.222 N
Shaft attachment
Finished bore
QD Bushings features and Benefits
- 4 Degree Taper
- Easy on/Easy off
- Manufactured precisely to industry standards
- Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
- QD is a registered trademark of Emerson Electric
Conventional Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange first
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design
Reverse Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
IMPORTANT!
Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read more
| Brand | Champion |
| Model | 7006-3 |
| Brand | Chicago-Latrobe |
| Model | 45671 |
| Brand | Dormer Pramet |
| Model | K52220.0X5.0X200.0 |
| Brand | E-T-A |
| Model | 1180-01-5A |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreSKU: 704413
Perfect fit and finish
Good product, perfect fit and finish, good price and fast shipping. Thanks
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/