Image for Illustration purposes only. Actual product may vary

Dodge 117385 SDS-20mm Quick Disconnect (QD) bushing for metric shafts, 20mm finished bore with 6x2.8mm keyway. Sintered steel construction with three-bolt clamping and 1.31" bore length. Rated torque 5000 lbf-in for power transmission sheaves, sprockets, and pulleys.

MODEL 117385

BRAND

Dodge

SKU

119336

WEIGHT

1.650 lb

UOM

each

Contact supplier for technical support on: +1-864-284-5700

$39.80 Each

Prices are subject to change

ADD $60.20 MORE FOR FREE SHIPPING

Select Quantity

GET A QUOTE

Typically Ships in: 1 day

Returnable: See conditions

Bore diameter actual

20.0000 mm, 0.787 in

Bore length

1.3100 in, 33.274 mm

Bushing size

SDS

Bushing type

I.D.

20 mm

Installation torque

108 in/lb, 108.0 in/lb

Integral key

Keyway

6 x 2.8 mm

Keyway size

6 X 6

Material

Sintered steel

Number of bolts

Rated Torque

5000.0000 lbf, 22241.108 N

Shaft attachment

Finished bore

QD Bushing - Metric Bore/Metric Hardware

DODGE QD-style bushings stocked in popular finish bore sizes and minimum plain bore, for custom reboring
DODGE Metric QD bushings supplied with metric hex-head cap screws and lock washers
Stock reborable bushings available for custom reboring
Reboring and sawsplit available from DODGE for nominal extra charge
Can be used with DODGE HTD sprockets for conventional mounting only (English thread hardware required for demounting.)

NOTE: Rebore by others must be sawsplit after rebore

QD Bushings features and Benefits

4 Degree Taper
Easy on/Easy off
Manufactured precisely to industry standards
Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
QD is a registered trademark of Emerson Electric

Conventional Mounting

Easy On
Place bushing in product
Align clearance holes in product with threaded holes in bushing
Install screws and lockwashers thru clearance holes, finger tight
Slide assembly onto shaft, flange first
Locate assembly on shaft for proper drive align ment
Tighten cap screws alternately and evenly to specified torque
Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design

Reverse Mounting

Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released

IMPORTANT!

Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.

How does Dodge warranty evaluation work if a product fails? This product

Failed units go to Dodge's US plants for evaluation — about a week in transit plus one to two weeks of analysis, and you get the findings either way. Warranty covers workmanship and material defects; failures caused by the application (lubrication, installation) fall to the customer, but the failure analysis tells you the root cause so it doesn't repeat.