Dodge 117558 SF-38mm Quick Disconnect (QD) bushing with 38mm finished bore and 10x3.3mm metric keyway. Sintered steel construction, rated for 11,000 lbf torque. For shaft mounting of sheaves, sprockets, and couplings in power transmission systems.

QD Bushing - Metric Bore/Metric Hardware

• DODGE QD-style bushings stocked in popular finish bore sizes and minimum plain bore, for custom reboring
• DODGE Metric QD bushings supplied with metric hex-head cap screws and lock washers
• Stock reborable bushings available for custom reboring
• Reboring and sawsplit available from DODGE for nominal extra charge
• Can be used with DODGE HTD sprockets for conventional mounting only (English thread hardware required for demounting.)

NOTE: Rebore by others must be sawsplit after rebore

QD Bushings features and Benefits

• 4 Degree Taper
• Easy on/Easy off
• Manufactured precisely to industry standards
• Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
• QD is a registered trademark of Emerson Electric

Conventional Mounting

• Easy On
• Place bushing in product
• Align clearance holes in product with threaded holes in bushing
• Install screws and lockwashers thru clearance holes, finger tight
• Slide assembly onto shaft, flange first
• Locate assembly on shaft for proper drive align ment
• Tighten cap screws alternately and evenly to specified torque
• Easy Off
  • Remove cap screws and install in product threaded holes
  • Alternately and evenly tighten screws until bush ing grip is released
  • Flanged Design

Reverse Mounting

• Easy On
  • Place bushing in product
  • Align clearance holes in product with threaded holes in bushing
  • Install screws and lockwashers thru clearance holes, finger tight
  • Slide assembly onto shaft, flange outward
  • Locate assembly on shaft for proper drive align ment
  • Tighten cap screws alternately and evenly to specified torque
• Easy Off
  • Remove cap screws and reinstall in flange threaded holes
  • Alternately and evenly tighten screws until bush ing grip is released

IMPORTANT!

Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.