We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Linn-Gear H78C18 Flame Cut Sprocket H1
MODEL H78C18
Contact supplier for technical support on: 800 547 2471
$393.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore Diameter
1.687 to 4 in
Chain Size
#H78
Hub Diameter
6 in
Length Through Bore
4.12 in
Material
Steel
Number of Teeth
18
Pitch
2.609 in
Pitch Diameter
15.025 in
Type
Type-C
Type C Steel Sprockets for No. H78 Mill Chain
2.609³ Chain Pitch 7/8³ Barrel Diameter 7/8³ Sprocket Face Width
Stock bores are nominal and must be re-bored even though bore desired is
same size as listed stock bore.
Listed maximum bore is with set screw at angle to keyway.
Stock sprockets may also be used with the following chains or others having the same pitch, barrel diameter and width; however all may not clear standard hub on 6 and 7 tooth sprockets due to variations in side bars.
Chain Belt H74, WR78, WH78, H79, 188, S188, 578, R588, RR588, R778, RR778, 988, 1578
Jeffrey H74, H76, WS78, H79, C188M, 488, JS880, JS882, IS881, IS886, IS887, 1587AC, 6188M, 6388J
Link Belt H74, C78, H79, C188, SS188, SS388, 488, SS578, 788, LXS881, LXS882, LXS886, LXS887
Moline H74, 88, C188, 488
Union 87R, 88, 188, C188, 218RX, US278, US278R, 517R, 517RX, 578R, 588R, 588RX, US881, US882
Webster H74, 78, 88, SS88, SS88+, 188, ZW188E, S517
Sprockets of other face widths or tooth numbers as well as those for practically any other chain are readily available and all can be furnished with hardened teeth. Please inquire for information and delivery.
Split Mill Chain Sprocket info (PDF)
Specifications
| Pitch Diameter | 15.025 |
|---|---|
| Maximum Bore | 4.000" |
| Stock Bore | 1.687" |
| Hub Diameter | Pitch Diameter 0 |
| Length Through Bore | Pitch Diameter 1 |
| Sprocket Weight | Pitch Diameter 2 |
| Brand | FK Bearing |
| Model | NJFL7 |
| Brand | U.S. Seal Mfg. |
| Model | FA-160 |
