We never sell your data to third parties
$358.46 Each
Prices are subject to change
THIS ORDER SHIPS FREE
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Height
6 in
Length
17 in
Suitable For Use With
Model SO5 and SO6 1-1/2 in Dia Idler Shafts
Type
Spring Loaded Automatic Heavy
Width
3-3/16 in
Description
T-Series/Spring Loaded The Universal Drive Tensioner Spring loaded T-series incorporates an adjusting slot for control tensioning and a serrated arm, permitting tensioning at any point on a 360º arc. The "T" Series tensioner has a spring for a constant tension which is more practical for pulsating loads. The base is more practical for pulsating loads. The base is made of high-grade semi-steel casting, incorporating a needle bearing and ball bearing to eliminate binding on over-hung loads. A precision cut gear and rack combined with a spring enables the arm to work 90º in either direction. The standard model will support a 22# load at the idler shaft center. If more capacity is desired, a heavier spring is available to support up to 44# which pivots 45º in either direction.
Specifications
| Model No. | Use with Shaft No. * | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | App. Wt. |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MSL | SO-5 | 3-1/4" | 4" | 1-1/2" | 3-3/16" | 1-7/8" | 6" | 4-3/8" | 7" | 3" | 2-5/8" | 1-5/8" | 5/8" | 10" | 1-5/8" | 13/16" | 18 |
| SO-5 | 5-1/4" | 6" |
Brewer makes the best!
Verified · SKU 1286278Brewer makes the best idler for my application. I tried a cheaper stamped steel unit. It broke almost instantly. Brewer is the way to go. Read more
#2089286
Brand
Irwin Tools
Model
7649
