Formsprag CL41326-10RH FSR-5/.500RH sprag backstop clutch with a 0.500-inch bore and right-hand rotation. This FSR-5 backstop is designed for inclined conveyor and bucket elevator applications to prevent reverse rotation under load. The clutch is pre-greased and sealed for maintenance-free operation.

Altra Industrial Motion Formsprag Clutch&Reg; CL41326-10RH

UPC: 786582300751 | UNSPSC: 26111910 | GTIN:

Clutches & Brakes > Mechanical Clutches & Brakes > Mechanical Clutches

Formsprag Clutch® Formchrome® Sprag Clutch, Series: FSR-5, 1/2 in Bore, 2 in OD, 2-3/4 in Overall Length, 110 ft-lb Torque, 1950 rpm Inner/900 rpm Outer Race Maximum, Vertical (Zero-U) Mounting

Features:

• All FSR model clutches incorporate Formchrome® sprags
• Sleeve bearing supported designs
• Oil lubrication
• Formsprag Clutch® recommends the use of our HPI series for indexing rates in excess of 150 strokes per minute or indexing angles in excess of 90 deg
• Right hand rotation

Specs:

• Torque Rating: 110 ft-lb
• Mounting Type: Vertical (Zero-U)
• Bore Diameter: 1/2 in
• Outside Diameter: 2 in
• Overall Length: 2-3/4 in
• Maximum Speed: 1950 rpm Inner/900 rpm Outer Race
• Series: FSR-5

Packaging:

• Weight: 1.685 lb

Warranty:

1 Year