Formsprag CL41225-1GRLH FSR-10/1.250GRLH sprag backstop clutch with a 1.250-inch bore. This FSR-10 series backstop is pre-greased and configured for left-hand free-running direction. Designed for inclined conveyor and bucket elevator backstopping applications to prevent reverse rotation under load.

Altra Industrial Motion Formsprag Clutch&Reg; CL41225-1GRLH

UPC: 786582298294 | UNSPSC: 26111910 | GTIN:

Clutches & Brakes > Mechanical Clutches & Brakes > Mechanical Clutches

Formsprag Clutch® Formchrome® Sprag Clutch, Series: FSR-10, 1-1/4 in Bore, 3-3/4 in OD, 3-1/2 in Overall Length, 675 ft-lb Torque, 1250 rpm Inner/350 rpm Outer Race Maximum, Vertical (Zero-U) Mounting

Features:

• All FSR model clutches incorporate Formchrome® sprags
• Sleeve bearing supported designs
• Grease lubrication
• Formsprag Clutch® recommends the use of our HPI series for indexing rates in excess of 150 strokes per minute or indexing angles in excess of 90 deg
• Left hand rotation

Specs:

• Torque Rating: 675 ft-lb
• Mounting Type: Vertical (Zero-U)
• Bore Diameter: 1-1/4 in
• Outside Diameter: 3-3/4 in
• Overall Length: 3-1/2 in
• Maximum Speed: 1250 rpm Inner/350 rpm Outer Race
• Series: FSR-10

Packaging:

• Weight: 5.733 lb

Warranty:

1 Year