We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Toshiba 0152XSSC42A-P EQP Global 840 C-Face footed inverter duty motor, 15 HP, 3600 RPM, 575V three-phase, 254TC frame, Totally Enclosed Fan Cooled. This NEMA Premium efficiency motor is designed for variable frequency drive applications with Class H insulation and 1000:1 constant-torque turn-down.
MODEL 0152XSSC42A-P
$1,654.44 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable: See conditions
Application Type
Compressor Motors, General Purpose AC Motors
Bearing Type
Ball
Constant Torque Speed Range
10:01
Enclosure
TEFC
Frame
254TC
Height
12.9 in
HP
15
Hz
50/60
Insulation Class
Class F
Length
25.1 in
Material
Cast Iron
Mounting Type
Dual/C-Face Footed
Number of Speeds
1
Phase
3
Rotation
CW/CCW
RPM
3400 - 3600
Series
840
Service Factor
1.15
Shaft Diameter
1-5/8 in
Shaft Length
4 in
Special Features
Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors
Temperature Rating
-13 to 104 deg F
Torque Rating
22.3 ft-lb
Type
Continuous-Duty Type IKH
Variable Torque Speed Range
60:01:00
Voltage
575
Width
13.1 in
See all of our 15 HP 254TC Motors
Toshiba Toshiba 0152XSSC42A-P
UPC: | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Toshiba EQP Global AC Motor, Continuous-Duty Type IKH, Series: 840, Compressor Motors, General Purpose AC Motors Application, Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors Special Features, 15 hp, 575 VAC, 15 A, 60 Hz Frequency, 3 ph ph, 3600 rpm Speed, 1 Speed, Totally Enclosed Fan Cooled (TEFC) Enclosure, 254TC Frame, 1-5/8 in Dia x 4 in L Shaft, CW/CCW Rotation, 1.15 Service Factor, Ball Bearing, 22.3 ft-lb Torque, Dual/C-Face Footed Mounting, -13 to 104 deg F, Insulation Class: Class F, Cast Iron, 10:1 Constant Torque Speed, 60:1 Variable Torque Speed, 25.1 in L x 13.1 in W x 12.9 in H Dimensions
Features:
- NEMA design B
- IP55 protection
- Multiple drain provisions for horizontal and vertical mounting
- Oversized 300 series bearings
- 100% no load commercial test per IEEE 112 on all motors
- T-shaft end
- 2-pole
Specs:
| Variable Torque Speed Range | 60:1 |
|---|---|
| Constant Torque Speed Range | 10:1 |
| Service Factor | 1.15 |
| Special Features | Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors |
| Application Type | Compressor Motors, General Purpose AC Motors |
| Insulation Class | Class F |
| Shaft Size | 1-5/8 in Dia x 4 in L |
| Torque Rating | 22.3 ft-lb |
| Phase | 3 ph |
| Horsepower | 15 hp |
| Number of Speeds | 1 |
| Rotation | CW/CCW |
| Frame | 254TC |
| Bearing Type | Ball |
| Temperature Rating | -13 to 104 deg F |
| Enclosure Type | Totally Enclosed Fan Cooled (TEFC) |
| Speed | 3600 rpm |
| Frequency Rating | 60 Hz |
| Mounting Type | Dual/C-Face Footed |
| Amperage Rating | 15 A |
| Voltage Rating | 575 VAC |
| Dimensions | 25.1 in L x 13.1 in W x 12.9 in H |
| Material | Cast Iron |
| Type | Continuous-Duty Type IKH |
| Series | 840 |
Packaging:
- Length: 27.0 in
- Width: 22.0 in
- Height: 17.0 in
Certifications/Standards:
CE/CSA/NEC Certified | ee CC027B | IEEE 112 | NEMA Premium® MG1 Part 31 | UR Listed
3 Years
