We never sell your data to third parties
Toshiba 0202XSSC44A-P EQP Global 840 C-Face footless inverter duty motor, 20 HP, 3600 RPM, 575V three-phase, 60 Hz, 256TC frame, Totally Enclosed Fan Cooled (TEFC) enclosure. Designed for variable frequency drive (VFD) applications with inverter duty rating.
MODEL 0202XSSC44A-P
$2,154.59 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable: See conditions
Application Type
Compressor Motors, General Purpose AC Motors
Bearing Type
Ball
Constant Torque Speed Range
10:01
Enclosure
TEFC
Frame
256TC
HP
20
Hz
50/60
Insulation Class
Class F
Length
25.1 in
Material
Cast Iron
Mounting Type
Dual/C-Face Round
Number of Speeds
1
Phase
3
Rotation
CW/CCW
RPM
3400 - 3600
Series
840
Service Factor
1.15
Shaft Diameter
1-5/8 in
Shaft Length
4 in
Special Features
Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors
Temperature Rating
-13 to 104 deg F
Torque Rating
29.8 ft-lb
Type
Continuous-Duty Type TKKH
Variable Torque Speed Range
60:01:00
Voltage
575
Width
13.1 in
Toshiba Toshiba 0202XSSC44A-P
UPC: | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Toshiba EQP Global® AC Motor, Continuous-Duty Type TKKH, Series: 840, Compressor Motors, General Purpose AC Motors Application, Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors Special Features, 20 hp, 575 VAC, 20 A, 60 Hz Frequency, 3 ph ph, 3600 rpm Speed, 1 Speed, Totally Enclosed Fan Cooled (TEFC) Enclosure, 256TC Frame, 1-5/8 in Dia x 4 in L Shaft, CW/CCW Rotation, 1.15 Service Factor, Ball Bearing, 29.8 ft-lb Torque, Dual/C-Face Round Mounting, -13 to 104 deg F, Insulation Class: Class F, Cast Iron, 10:1 Constant Torque Speed, 60:1 Variable Torque Speed, 25.1 in L x 13.1 in W Dimensions
Features:
- NEMA design B
- IP55 protection
- Multiple drain provisions for horizontal and vertical mounting
- Oversized 300 series bearings
- 100% no load commercial test per IEEE 112 on all motors
- T-shaft end
- 2-pole
Specs:
- Variable Torque Speed Range: 60:1
- Constant Torque Speed Range: 10:1
- Service Factor: 1.15
- Special Features: Low Voltage Motors, Severe Duty Motors, Vector (Inverter) Duty Motors
- Application Type: Compressor Motors, General Purpose AC Motors
- Insulation Class: Class F
- Shaft Size: 1-5/8 in Dia x 4 in L
- Torque Rating: 29.8 ft-lb
- Phase: 3 ph
- Horsepower: 20 hp
- Number of Speeds: 1
- Rotation: CW/CCW
- Frame: 256TC
- Bearing Type: Ball
- Temperature Rating: -13 to 104 deg F
- Enclosure Type: Totally Enclosed Fan Cooled (TEFC)
- Speed: 3600 rpm
- Frequency Rating: 60 Hz
- Mounting Type: Dual/C-Face Round
- Amperage Rating: 20 A
- Voltage Rating: 575 VAC
- Dimensions: 25.1 in L x 13.1 in W
- Material: Cast Iron
- Type: Continuous-Duty Type TKKH
- Series: 840
Certifications/Standards:
CE/CSA/NEC Certified | ee CC027B | IEEE 112 | NEMA Premium® MG1 Part 31 | UR Listed
Warranty:
3 Years
| Brand | Mako Products |
| Model | EME-4-8N |
| Brand | Mako Products |
| Model | MGSSB-8-6L |
| Brand | Mako Products |
| Model | MGSSB-4-12L |
