We never sell your data to third parties
Toshiba F2002VLG3JF Weather Protected Type I (WPI) open enclosure motor rated 200 HP at 3600 RPM, 2300/4160V three-phase, 60 Hz. Built on a NEMA 445TS frame with high efficiency for continuous duty in outdoor or partially protected industrial environments.
MODEL F2002VLG3JF
Contact supplier for technical support on: tic-dist1@toshiba.co
$21,077.55 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Typically Ships in: 3 days
Returnable: See conditions
Amperage
49/28
Application Type
Compressor Motors, General Purpose AC Motors
Bearing Type
Ball
Enclosure
ODP
Frame
445TS
Height
22.4 in
HP
200
Hz
60
Insulation Class
Class F
Length
36 in
Material
Cast Iron
Mounting Type
Floor/Horizontal Footed
Number of Speeds
1
Phase
3
Rotation
CW/CCW
RPM
3400 - 3600
Service Factor
1.15
Shaft Diameter
2-3/8 in
Shaft Length
4-3/4 in
Special Features
Medium Voltage Motors
Temperature Rating
-13 to 104 deg F
Torque Rating
295 ft-lb
Type
Continuous-Duty Type TIKK
Voltage
2300/4160
Width
22.1 in
Toshiba Toshiba F2002VLG3JF
UPC: | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Toshiba AC Motor, Continuous-Duty Type TIKK, Compressor Motors, General Purpose AC Motors Application, Medium Voltage Motors Special Features, 200 hp, 2300/4160 VAC, 49/28 A, 60 Hz Frequency, 3 ph ph, 3600 rpm Speed, 1 Speed, Open Drip-Proof Enclosure, 445TS Frame, 2-3/8 in Dia x 4-3/4 in L Shaft, CW/CCW Rotation, 1.15 Service Factor, Ball Bearing, 295 ft-lb Torque, Floor/Horizontal Footed Mounting, -13 to 104 deg F, Insulation Class: Class F, Cast Iron, 36 in L x 22.1 in W x 22.4 in H Dimensions
Features:
- High efficiency
- Class B temperature rise at 1.0 service factor by resistance
- IP22 protection
- Vacuum pressure impregnated system
- Polyurea base grease
- Open ball bearing with plugs
- Short shaft end
- 2-pole
Specs:
| Service Factor | 1.15 |
|---|---|
| Special Features | Medium Voltage Motors |
| Application Type | Compressor Motors, General Purpose AC Motors |
| Insulation Class | Class F |
| Shaft Size | 2-3/8 in Dia x 4-3/4 in L |
| Torque Rating | 295 ft-lb |
| Phase | 3 ph |
| Horsepower | 200 hp |
| Number of Speeds | 1 |
| Rotation | CW/CCW |
| Frame | 445TS |
| Bearing Type | Ball |
| Temperature Rating | -13 to 104 deg F |
| Enclosure Type | Open Drip-Proof |
| Speed | 3600 rpm |
| Frequency Rating | 60 Hz |
| Mounting Type | Floor/Horizontal Footed |
| Amperage Rating | 49/28 A |
| Voltage Rating | 2300/4160 VAC |
| Dimensions | 36 in L x 22.1 in W x 22.4 in H |
| Material | Cast Iron |
| Type | Continuous-Duty Type TIKK |
Packaging:
Certifications/Standards:
ANSI/CSA/NEC Certified | IEEE 112 | NEMA MG1
18 Months
#734829
Brand
SKF Seals
Model
65X90X10 HMSA10 RG
#534848
Brand
Nexen
Model
928100