We never sell your data to third parties
Toshiba F2504VLF3JF Weather Protected Type I (WPI) open enclosure three-phase motor rated 250 HP at 1800 RPM. Operates on 2300/4160V at 60 Hz with a 447TS frame. This high efficiency motor is designed for outdoor and protected indoor applications requiring reliable performance in moderate environmental conditions.
MODEL F2504VLF3JF
Contact supplier for technical support on: tic-dist1@toshiba.co
$25,288.25 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Typically Ships in: 3 days
Returnable: See conditions
Amperage
60/34
Application Type
Compressor Motors, General Purpose AC Motors
Bearing Type
Ball
Enclosure
ODP
Frame
447TS
Height
22.4 in
HP
250
Hz
60
Insulation Class
Class F
Length
39.5 in
Material
Cast Iron
Mounting Type
Floor/Horizontal Footed
Number of Speeds
1
Phase
3
Rotation
CW/CCW
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
2-3/8 in
Shaft Length
4-3/4 in
Special Features
Medium Voltage Motors
Temperature Rating
-13 to 104 deg F
Torque Rating
740 ft-lb
Type
Continuous-Duty Type TIKK
Voltage
2300/4160
Width
22 in
Toshiba Toshiba F2504VLF3JF
UPC: | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Toshiba AC Motor, Continuous-Duty Type TIKK, Compressor Motors, General Purpose AC Motors Application, Medium Voltage Motors Special Features, 250 hp, 2300/4160 VAC, 60/34 A, 60 Hz Frequency, 3 ph ph, 1800 rpm Speed, 1 Speed, Open Drip-Proof Enclosure, 447TS Frame, 2-3/8 in Dia x 4-3/4 in L Shaft, CW/CCW Rotation, 1.15 Service Factor, Ball Bearing, 740 ft-lb Torque, Floor/Horizontal Footed Mounting, -13 to 104 deg F, Insulation Class: Class F, Cast Iron, 39.5 in L x 22 in W x 22.4 in H Dimensions
Features:
- High efficiency
- Class B temperature rise at 1.0 service factor by resistance
- IP22 protection
- Vacuum pressure impregnated system
- Polyurea base grease
- Open ball bearing with plugs
- Standard shaft end
- 4-pole
Specs:
- Service Factor: 1.15
- Special Features: Medium Voltage Motors
- Application Type: Compressor Motors, General Purpose AC Motors
- Insulation Class: Class F
- Shaft Size: 2-3/8 in Dia x 4-3/4 in L
- Torque Rating: 740 ft-lb
- Phase: 3 ph
- Horsepower: 250 hp
- Number of Speeds: 1
- Rotation: CW/CCW
- Frame: 447TS
- Bearing Type: Ball
- Temperature Rating: -13 to 104 deg F
- Enclosure Type: Open Drip-Proof
- Speed: 1800 rpm
- Frequency Rating: 60 Hz
- Mounting Type: Floor/Horizontal Footed
- Amperage Rating: 60/34 A
- Voltage Rating: 2300/4160 VAC
- Dimensions: 39.5 in L x 22 in W x 22.4 in H
- Material: Cast Iron
- Type: Continuous-Duty Type TIKK
Packaging:
- Weight: 1795.0 lb
Certifications/Standards:
ANSI/CSA/NEC Certified | IEEE 112 | NEMA MG1
Warranty:
18 Months
| Brand | Brook Crompton |
| Model | PX4N060-2 |
| Brand | Consolidated Bearings |
| Model | TP FY-104 L |
| Brand | Rossi |
| Model | R000249575 |