We never sell your data to third parties
Toshiba F4008VLF3JM 400 HP 900 RPM 2300/4160V three-phase Weather Protected Type I motor with 5810US frame. Open enclosure with louvered intake ventilation for outdoor and protected indoor installations. High efficiency design for continuous duty in demanding environments.
MODEL F4008VLF3JM
Contact supplier for technical support on: tic-dist1@toshiba.co
$78,180.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Typically Ships in: 3 days
Returnable: See conditions
Amperage
98/56
Application Type
Compressor Motors, General Purpose AC Motors
Bearing Type
Ball
Enclosure
ODP
Frame
5810US
Height
29.84 in
HP
400
Hz
60
Insulation Class
Class F
Length
61.98 in
Material
Cast Iron
Mounting Type
Floor/Horizontal Footed
Number of Speeds
1
Phase
3
Rotation
CW/CCW
RPM
900
Service Factor
1.15
Shaft Diameter
4 in
Shaft Length
8.27 in
Special Features
Medium Voltage Motors
Temperature Rating
-13 to 104 deg F
Torque Rating
2360 ft-lb
Type
Continuous-Duty Type TIKE
Voltage
2300/4160
Width
29.52 in
Toshiba Toshiba F4008VLF3JM
UPC: | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Toshiba AC Motor, Continuous-Duty Type TIKE, Compressor Motors, General Purpose AC Motors Application, Medium Voltage Motors Special Features, 400 hp, 2300/4160 VAC, 98/56 A, 60 Hz Frequency, 3 ph ph, 900 rpm Speed, 1 Speed, Open Drip-Proof Enclosure, 5810US Frame, 4 in Dia x 8.27 in L Shaft, CW/CCW Rotation, 1.15 Service Factor, Ball Bearing, 2360 ft-lb Torque, Floor/Horizontal Footed Mounting, -13 to 104 deg F, Insulation Class: Class F, Cast Iron, 61.98 in L x 29.52 in W x 29.84 in H Dimensions
Features:
- High efficiency
- Class B temperature rise at 1.0 service factor by resistance
- IP22 protection
- Vacuum pressure impregnated system
- Polyurea base grease
- Open ball bearing with plugs
- Standard shaft end
- 9-pole
Specs:
| Service Factor | 1.15 |
|---|---|
| Special Features | Medium Voltage Motors |
| Application Type | Compressor Motors, General Purpose AC Motors |
| Insulation Class | Class F |
| Shaft Size | 4 in Dia x 8.27 in L |
| Torque Rating | 2360 ft-lb |
| Phase | 3 ph |
| Horsepower | 400 hp |
| Number of Speeds | 1 |
| Rotation | CW/CCW |
| Frame | 5810US |
| Bearing Type | Ball |
| Temperature Rating | -13 to 104 deg F |
| Enclosure Type | Open Drip-Proof |
| Speed | 900 rpm |
| Frequency Rating | 60 Hz |
| Mounting Type | Floor/Horizontal Footed |
| Amperage Rating | 98/56 A |
| Voltage Rating | 2300/4160 VAC |
| Dimensions | 61.98 in L x 29.52 in W x 29.84 in H |
| Material | Cast Iron |
| Type | Continuous-Duty Type TIKE |
Packaging:
Certifications/Standards:
ANSI/CSA/NEC Certified | IEEE 112 | NEMA MG1
18 Months
| Brand | Antaira |
| Model | SFP-S120-T-H |
| Brand | Antaira |
| Model | LNP-0602-S3-T |