Image for Illustration purposes only. Actual product may vary
Grundfos 96465610 MS 402 W/CABLE 1X230V 60HZ 1.00HP 3W
MODEL 96465610
$539.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: Yes
Still Deciding?
Add this item to your saved items and easily come back later.
Rated voltage
1 x 230 V
HP
1
Start method
direct-on-line
Rated speed
3450 rpm
Voltage tolerance
+10/-10 %
Mains frequency
60 Hz
Product name
MS 402
Windings
Enamelled
Maximum current consumption
9.8 A
Axial load max
350 kg
Motor diameter
4 in
R s1
11.0 ohm
Rated current
9.8 A
Approvals
CE,EAC,CSACOMP,UR
Starting current
430 %
Product no
96465610
Rated full-load torque
2.88 Nm
Insulation class (IEC 85)
B
KVA code
K
Moment of inertia
0.0006 kg m²
Breakdown torque
190 %
Built-in motor protection
CONTACT
Motor version
T40
Staybolt
5/16-24 UNF
Built-in temp transmitter
No
Cos phi - power factor
0.82
Maximum ambient pressure (bar)
15
Thermal protec
internal
Service factor
1.40
Shaft seal for motor
LIPSEAL
Model
B
Motor type 1-phase
CSIR
Locked-rotor torque
160 %
R a
2.90 ohm
Rated power - P2
0.75 kW
Capacitor size - start
120 µF/220 V
Enclosure class (IEC 34-5)
IP68
Motor
Stainless steel
Motor type
MS402
Grundfos Grundfos 96465610
UPC: | UNSPSC: 26101107 | GTIN:
Electric Motors > AC Motors
Grundfos Submersible Motor, 3-Wire, 1 hp, 230 VAC, 9.8 A, 60 Hz, 1 ph, 3450 rpm, Service Factor: 1.4, Thrust Bearing, 2.88 N-m, Insulation Class: Class B, 304 Stainless Steel, 4 in Dia
Features:
- Over temperature protection via power cable by means of a built-in tempcon temperature transmitter
- Standardized NEMA flange and shaft end
- Mechanical shaft seal, ceramic/carbon or Sic/Sic
- Completely encapsulated in stainless steel
- All surfaces in contact with the liquid are made of stainless steel
- Liquid-cooled and has liquid-lubricated bearings
- MS 402: Designed for the domestic ground water market and covers outputs up to 2.2 kW (3 hp)
- Michell-type thrust bearings with high thrust capacity
- Quickly builds up a water film during start-up to ensure high thrust capacity
- Can be fitted on all Grundfos SP-A, SP pumps and can be used in the type BM and BMB high pressure booster modules
Specs:
- Service Factor: 1.4
- Insulation Class: Class B
- Torque Rating: 2.88 N-m
- Phase: 1 ph
- Horsepower: 1 hp
- Bearing Type: Thrust
- Speed: 3450 rpm
- Frequency Rating: 60 Hz
- Amperage Rating: 9.8 A
- Voltage Rating: 230 VAC
- Dimensions: 4 in Dia
- Material: 304 Stainless Steel
- Type: 3-Wire
Certifications/Standards:
CE Certified | EAC | CSA COMP | UR Certified
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
