Toshiba TE2-450-BP TE2 series motor starter rated 450 amps at 208-575V three-phase 60 Hz. Open enclosure design for indoor or protected installations. Suitable for across-the-line starting of three-phase AC induction motors up to 450A full-load current.

Toshiba Toshiba TE2-450-BP

UPC: | UNSPSC: 39121521 | GTIN:

Industrial Control > Soft Starters > Open Soft Starters

Toshiba Open Solid State Soft Starter, Low Voltage Heavy Duty, Series: TE2, 208 to 575 V, 450 A, 50/60 Hz, 1000 hp Motor, 120 VAC Coil, 1 to 120 s Timing, Automatic/Manual Reset, 3 ph, On/Off, Electronic Overload Relay, Pump-Flex™ Deceleration/Pump Control, NEMA 12/4, Starting Modes: Ramp-Up, 12.5 in W x 9.1 in D x 29.75 in H

Features:

• Three phase voltage metering
• Power factor indications and protections
• 4 to 20 mA analog output
• Built-in bypass contactor
• RTU Modbus RS485 communications
• Advanced motor protection
• Narrow width for motor control center (MCC) mounting
• Remote keypad mounting
• Pull-apart control terminals for easy assembly and wiring
• Smooth, stepless soft start voltage ramp start - 1 to 120 s, initial voltage - 0 to 100%
• Soft stop voltage - 0 to 100%
• 200 to 600% current limit
• 500% overload capacity for 60 s
• Undercurrent
• Overcurrent
• Jog mode
• Three programmable output relays
• 2-wire/3-wire control standard
• 4-digit EOI display
• Start and run protection

Specs:

• Starting Modes: Ramp-Up
• Overload Relay: Electronic
• Reset Type: Automatic/Manual
• Timing: 1 to 120 s
• Motor Power: 1000 hp
• Coil Voltage: 120 VAC
• Phase: 3 ph
• Action: On/Off
• Enclosure Type: NEMA 12/4
• Frequency Rating: 50/60 Hz
• Control Type: Pump-Flex™ Deceleration/Pump
• Amperage Rating: 450 A
• Voltage Rating: 208 to 575 V
• Dimensions: 12.5 in W x 9.1 in D x 29.75 in H
• Type: Low Voltage Heavy Duty
• Series: TE2

Packaging:

• Length: 18.0 in
• Width: 36.0 in
• Height: 27.0 in
• Weight: 145.0 lb

Certifications/Standards:

cULus Listed | UL Listed