NORD SK93672.1AMHD-100AP/4 CUS TW helical-bevel gearmotor with UNICASE cast-iron housing. 100AP/4 IEC frame, 4-pole, 1800 RPM. Right-angle design for high-torque industrial applications. Custom-configured assembly per technical worksheet.

Product Name Helical-Bevel Gearmotor
Motor series Asynchronmotor PREM AL (B)
Motor Type 3-Ph AC Motor CUS AxAB
Motor Speed 1,760 rpm
Ratio 4.36
Stages 2
Output Speed 404.000 rpm
Service Factor 4.50
Nominal Output Torque (lb-in) 625.00
Max. Torque Capacity (Nm) 315.00
Max. Torque Capacity (lb-in) 2,788.00
Motor Power (HP) 4.000
Voltage (V) 230/460
Frequency (Hz) 60
Efficiency Class Premium EFF acc. to EISAct
Duty Cycle CONT-S1
Motor Enclosure Type IP55
Insulation Class F
Rated Current Low Volt (A) 10.90
Rated Current High Volt (A) 5.43
Power Factor 1 0.79
Environmental temp. motor 40°C
Gearbox Mounting Position M2
Housing Type Hollow Shaft
Output Shaft Dimensions 2.000"
Breather Autovent
Shaft Seal Material Gearbox Dual Output Seal
Output Shaft Cover Gripmaxx Shaft & Cover
Shaft Cover Position Cover on A Side
Torque Arm / Bracket Torque arm
Torque Arm Position Ship Torque Arm Loose.
Shrink Disc Gripmaxx
Shrink Disc Location Shrink Disc Side A
Motor Temperature Protection Thermostat
Motor Connection Star; High Voltage
Terminal Box Position met. 1/I
Lubricant Type VG220-MIN-EP