NORD SK9022.1AFMH-112MP/4 CUS TW helical-bevel gearmotor with 112MP/4 IEC frame, 4-pole motor, and 1800 RPM nominal speed. UNICASE single-piece cast-iron housing provides rigidity and leak-free operation. Suitable for right-angle industrial drive applications requiring high torque and efficiency.

 Product Name Helical-Bevel Gearmotor
Motor Type 3-Ph AC Motor CUS
Motor Speed 1,755 rpm
Ratio 11.13
Stages 3
Output Speed 158.000 rpm
Service Factor 2.30
Nominal Output Torque (lb-in) 1,998.00
Max. Torque Capacity (Nm) 520.00
Max. Torque Capacity (lb-in) 4,602.00
Motor Power (HP) 5.000
Voltage (V) 230/460
Frequency (Hz) 60
Efficiency Class Premium EFF acc. to EISAct
Duty Cycle CONT S1
Motor Enclosure Type IP55
Insulation Class F
Rated Current Low Volt (A) 13.00
Rated Current High Volt (A) 6.50
Power Factor 1 0.80
Environmental temp. motor 40°C
Gearbox Mounting Position M5
Housing Type Hollow Shaft with Flange
Output Shaft Dimensions 1.500"
Output Shaft Diameter Fraction 1-1/2"
Flange Diameter (mm) 250
Flange Diameter (in) 9,84
Flange Location Flange Side A
 Breather Autovent
Output Shaft Cover Gripmaxx Shaft & Cover
Shaft Cover Position Cover on B Side
Shrink  Disc Gripmaxx
Shrink Disc Location Shrink Disc Side B
Motor Temperature Protection Thermostat
Motor Connection Star;  High Voltage
Terminal Box Position met. 4/II
Lubricant Type Food Grade - VG220-MIN
Lubricant Supplier Fuchs
Lubricant Fuchs FM220
Qty. lubricant (Qts) 2.430
Color Stainless Steel Gray
Paint Type Standard Paint
Paint Option NSD2+
CE Logo Yes
CCC Logo No
Mexico Certification NOM Yes
UL E191510
CSA 189340
DoE CC CC 092 B
CSA ev 189340
Alto Rendimento No
Korea Energy Label No
Separate part Clamp-Ring/Bushing Gripmaxx
Cover
Shrink Disc
Conduit Hole Connection NPT Adapter M32X1,5 /1.0000 in
Inv.Duty speed range speed range 10:1(standard)