SEW-Eurodrive DR2L100L4/BE5/FG/TF/AV8W/V asynchronous servomotor featuring BE5 brake, FG integrated encoder, TF thermistor thermal protection, AV8W special winding, and V reinforced bearings. Designed for precise motion control applications requiring reliable braking and feedback.

Mounting position : M1
Term.box.pos.[°] / cable entry : 0 (R) / normal
Paint coat : Top coat RAL7031 (blue gray)
Motor : DR2L100L4/BE5/FG/TF/AV8W/V
Output design : FG = integral motor
Output shaft end : pinion spigot 22mm
With fitted pinion no. : 00043311
Flange : FG215 D250
Output oil seal material : FKM
Max. motor speed [rpm] : 5200
Max. motor torque [Nm] : 94.00
Max. motor torque [lb-in] : 830
Dynamic package : Dynamic package 2
Motor frequency [Hz] : 102
Rated speed nN [rpm] : 3000
Nominal torque [Nm] : 21.00
Nominal torque [lb-in] : 186
Cyclic duration factor S1-S10 : S1
Maximum motor voltage [V] : 500
System voltage [V] : 400
Motor voltage [V] / conn. type : 330 delta
Nominal current [A] : 18.10
Wiring diagram : R13KT / 63118092.04
Thermal cl.[°C]/Enclosure[IP] : 155(F) / 54
CE mark : Yes
Brake : BE5
Brake voltage [V]/-torque [Nm] : 460 AC / 40
Brake torque [lb-in] : 354
Brake rectifier : BGE1.5
Brake wiring diagram : B100A / 63476932.01
Forced cooling fan : V = Forced cooling fan
Forced cooling fan voltage [V] : Single-phase:220...277VAC, 50/60Hz
Delta: 200...303VAC, 50Hz
Star: 346...525VAC, 50Hz
Delta: 220...332VAC, 60Hz
Star: 380...575VAC, 60Hz
Forced cool. fan rated current : 50 Hz 3 Ph Y 0.22 A/ 3 Ph D 0.39 A/ 1 Ph
0.29 A
60 Hz 3 Ph Y 0.18 A/ 3 Ph D 0.32 A/ 1 Ph
0.23 A
Forced cool.fan wir.diagr.no. : 690240007
Motor protection : TF = PTC Temperature sensor
Encoders : AV8W / Flange-centered, non-positive
mounting
Ø:10x23mm, synchro
(with fan guard with encoder mount and
coupling)
Electrical interface : Asynchronous, serial RS485
Incremental value : 2048
Absolute value : Single-turn 16 bits + multi-turn 16 bits
Encoder connection : Integrated encoder plug connector
on encoder cover
with connection cover
without thermal monitoring of the motor
A1GA
Encoder IS posit. cable entry : 0 (R) / normal
Encoder design : Supply voltage DC 7-30 V
Encoder wiring diagram : G22A / 63377926.01