Dixon WSR3 King Safety Cable Single Loop is a hose fitting designed to secure hose ends and prevent whipping in case of coupling failure. Constructed from galvanized carbon steel, it accommodates hose IDs from 1/2" to 2" (13mm to 50mm) and has a 28" length.

Dixon Valve & Coupling Dixon&Reg; WSR3

UPC: | UNSPSC: 40141734 | GTIN:

Pipe, Tubing & Hoses > Hoses > Hose Safety Cables

Dixon® Hose Cable, Series: King Cable™, 3/16 in Nominal, 28 in Length, 200 psi Working, Carbon Steel, Galvanized, Domestic

Features:

• King cable is the low cost answer to eliminate injuries caused by broken air hose connection
• King safety cable reaches across the hose fittings to provide standby safety for hose
• Spring-loaded loops in the cable ends open easily to pass over the couplings for a firm grip on the hose
• Thoroughly tested with years of service, a positive safeguard for air hose connection - helps you meet today's safety standards
• Highly resistant to rust and corrosion
• Galvanized carbon steel wire rope
• Aluminum ferrule
• Galvanized carbon steel spring
• 1/2 - 2 in ID hose
• Cables are shipped with safety restraint labels attached
• King safety cable must be installed in the extended position (no slack)
• The Canada occupational safety and health regulations part XIII, 13:6b states: "Where an air hose is connected to a portable air powered tool used by an employee, a restraining device shall be attached to all hose connections, in order to prevent injury to an employee in the even of an accidental disconnection of a hose"
• Warning: this product contains a chemical known to the State of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Working Pressure: 200 psi
• Nominal Size: 3/16 in
• Domestic/Import: Domestic
• Material: Carbon Steel
• Finish: Galvanized
• Length: 28 in
• Series: King Cable™

Packaging:

• Weight: 0.41 lb