Saginaw Control SCE-462519DC NEMA 12 dual-access single-door console enclosure, 46.25" H x 25.25" W x 18.50" D. Carbon steel with ANSI-61 gray powder coat finish. UL Type 12 listed for indoor industrial dust and drip protection. Front and rear entry for wiring and component mounting.

Application

This product is intended for indoor use. It provides protection to personnel against access to hazardous parts. In addition, it protects the equipment inside the enclosure against introduction of solid foreign objects, falling dirt and water. It is designed for use in a standing or sitting position, supports both single and dual access, and boasts a top that opens for easier accessibility.

Construction

• 0.075” carbon steel.
• Seams continuously welded and ground smooth.
• 25 degree sloped top.
• Door props on sloped door to hold in the open position.
• Oil and water resistant gasket.
• Flange trough collar around all sides of door opening.
• Concealed hinge.
• Removable doors.
• Removable print pocket.
• Ground studs on door and body.
• Rubber pads with provision for leveling pads on bottom of enclosure.
• Black, quarter turn latches on top door.
• Key locking black 3 point flush swing handle in front door of single access front and rear doors on dual access.
• Optional tamper-resistant inserts or padlocking handles are available.
• Mounting studs welded on sides of interior body for mounting optional panels on dual access console.
• Mounting channels welded on sides of interior body for mounting optional panels on dual access console.
• Mounting hardware included for optional sub-panels.

Options

Can be special ordered in type 304 or 316 Stainless Steel.

Finish

ANSI-61 gray powder coating inside and out. Optional sub-panels are powder coated white.

Industry Standards - (IS2)

NEMA Type 4, 12 and Type 13UL Listed Type 4 and 12CSA Type 4 and 12IEC IEC 60529 IP IP 66