Starrett B565D brass drive pin punch with 5/32" tip diameter and 4" overall length. Brass tip prevents marring of workpieces during assembly and alignment tasks. Part of the B565 series from L.S. Starrett.

Our regular Starrett Drive Pin Punchs are made of hardened, tempered steel to with stand heavy duty work, but at times are too hard and can damage softer materials. The Starrett B565 brass punch is ideal for these applications as they are much softer than the steel version. The obvious disadvantage of brass punches is the same as their advantage -they are much softer than hardened steel. Obviously, the brass is less able to stand up to years of hard use. Ideally, it is good to have sets of both types and use the brass punches only when there is the possibility of damage to the work piece. Available in eight individual sizes from 1/16" to 5/16" and as a full set of eight in an attractive pouch. Brass Drive Pin Punch, 4" (100mm), 5/32" (4mm) Dia.

Features

• 1-13/16 in L x 19/64 in Dia knurled grip for secure holding
• Punch diameter clearly marked on the head
• Will not damage softer materials
• Non-sparking
• 7/8 in L drive pin
• 10 deg tapered