DIXON 40PFX3.062 2 1/2 PURE FLOW FERRULE

Dixon Valve & Coupling Dixon&Reg; 40PFX3.062

UPC: 089109749799 | UNSPSC: 27121703 | GTIN:

Pipe, Tube & Hose Fittings > Tube & Hose Fittings > Tube & Hose Ferrules

Dixon® Sanitary Flow Chief Ferrule, Internal Expansion, 2-1/2 in ID x 3 to 3-3/64 in OD Nominal, 2-15/16 in Length, 304 Stainless Steel, Domestic

Features:

• Ferrule ID's are designed in increments of 1/16 in
• Consult maximum working pressure chart or contact Dixon® for additional application and working pressure information
• Flow chief internal expansion (IX) fittings are only to be used with flow chief stainless steel ferrules
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Strict adherences to ferrule OD range (internally expanded) for each hose end to be assembled is essential for satisfactory performance
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended

Specs:

• Nominal Size: 2-1/2 in ID x 3 to 3-3/64 in OD
• Domestic/Import: Domestic
• Material: 304 Stainless Steel
• Type: Internal Expansion
• Length: 2-15/16 in

Packaging:

• Weight: 0.92 lb

Certifications/Standards:

PROP65: This product contains a chemical known to the state of California to cause birth defects or other reproductive harm

Warranty:

Limited