Dixon 72NAB42VS Air Brake Male Branch Tee is a brass hose fitting with a 1/4" tube OD and straight x pipe thread of 7/16"-24 x 1/8". Designed for air brake systems, this tee provides reliable branching in pneumatic lines.

Applications

Designed for use in air brake systems or cab controls

Construction

• Machined from CA260, CA345 or CA377 brass
• Pre-applied thread sealant
• Thread sealant may be white or burnt orange

Features

Positive grip

Installation

• Cut tubing squarely- maximum of 15° angle allowable.
• Check that port or mating part is clean and free of debris.
• Insert tubing into fittings until it bottoms on seat.
• Tighten nut with wrench until one thread remains visible on the fittings body; (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench-tightened according to the tube size used.

Specifications

• Meets D.O.T FMVSS 571.106 and SAE J246
• Ref. SAE 100425 BA

Use

• Utilize ribbed sleeve for compression and positive grip
• Compatible tubing: SAE J844 type A and B