DIXON GF3 3/8 IRON GJ BOSS FEMALE COUPLING

Dixon Valve & Coupling Dixon&Reg; GF3

UPC: | UNSPSC: 40141734 | GTIN:

Pipe, Tube & Hose Fittings > Tube & Hose Fittings > Steam Fittings

Dixon® Ground Joint Coupling, Series: Boss™, Coupling Fitting/Connector, 3/8 in Nominal, FNPT End Style, 1-1/16 in Hex, Iron/Steel, Plated, 1-1/32 in L x 2-15/16 in H Dimensions, Domestic

Features:

• The spud part of the coupling serves as one half of the connection and is usually fixed to the equipment
• The stem part that is clamped to the hose is the other half
• The two halves are connected or disconnected by rotating the wing nut on the spud, when connected they achieve both a mechanical and a pressure seal
• Easy to seal
• Boss couplings supply a convenient threaded fitting to connect two lengths of hose, or a single length to a male or female threaded outlet
• Use with Boss™ clamps
• Leakproof seal forms when the metal head of the stem makes contact with the patented polymer seat in the spud
• The non-metallic polymer seat resists most chemicals found in manufacturing facilities
• Recommended for steam service up to 450 deg F
• Note: pressurized steam is an extremely dangerous commodity
• Only hose, fittings, clamps and accessory items that have been approved for steam service should ever be used! never use an unapproved item for steam service
• Always follow the manufacturer's product recommendations for pressurized steam handling
• Warning: this product contains a chemical known to the state of California to cause birth defects or other reproductive harm
• Do not use in connection with drinking water
• Wash hands after handling

Specs:

• Fitting/Connector Type: Coupling
• Hex Size: 1-1/16 in
• Nominal Size: 3/8 in
• Domestic/Import: Domestic
• End Style: FNPT
• Dimensions: 1-1/32 in L x 2-15/16 in H
• Material: Iron/Steel
• Finish: Plated
• Series: Boss™

Packaging:

• Weight: 0.348 lb