Dixon R25FS brass ferrule for 520-H series hose, 2-1/2" hose ID. Provides secure compression fit for industrial hose assemblies. Durable brass construction offers corrosion resistance and reliable performance.

Dixon Valve & Coupling Dixon&Reg; R25FS

UPC: | UNSPSC: 40141734 | GTIN:

Pipe, Tube & Hose Fittings > Tube & Hose Fittings > Tube & Hose Ferrules

Dixon Ferrule, Scovill Style, Series: 520-H, 2-1/2 in ID x 3-22/64 to 3-26/64 in OD Nominal, Hose End Style, 2 in Length, Brass, 4 in Dia, Domestic

Features:

• For use with brass internally expanded permanent couplings
• H520 fittings are design for internal expansion only
• Do not interchange with other manufacturer's fittings
• Designed for internal expansion only
• Dixon holedall stems and ferrules are specifically designed to be used together as a coupling system
• Do not use a wrench or vice on ferrule
• Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
• Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
• Strict adherences to ferrule OD range (Internally Expanded) for each hose end to be assembled is essential for satisfactory performance
• Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
• The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
• Media being transported through the hose should be compatible with the stem material
• Compatibility of ferrule material with the environment in which it will be used is recommended
• For applications other than the ones list, please consult Dixon

Specs:

Packaging:

Certifications/Standards:

Warranty:

Limited